From: vidhya natarajan (vidhyanatarajan@rediffmail.com)
Date: Thu Oct 06 2005 - 16:07:45 GMT-3
Hi,
I encountered a strange(for me) ospf issue over NBMA.. I see the routes
in the ospf database and the neighbor state is full.. However, the routes
arent seen in the routing table..
I have a FR-hub and 4 spokes.. FR hub is a
multipoint interface and the spokes 2 of them are physical FR interfaces and 2
of them are point to point.. All the FR interfaces, ie., the hub interface and
the 4 spoke interfaces are in area 0... Now, none of the IA routes are seen in
Spokes that have serial point to point interfaces configured.... Im not sure
if im missing the obvious.. Can anyone please help?
Hub:
HUB#sh run int
s0/0.1
Building configuration...
Current configuration : 250 bytes
!
interface Serial0/0.1 multipoint
ip address 1.1.1.1 255.255.255.0
ip ospf
hello-interval 10
frame-relay interface-dlci 102
frame-relay interface-dlci
103
frame-relay interface-dlci 104
frame-relay interface-dlci 105
end
HUB#
HUB#sh ip ospf nei
Neighbor ID Pri State Dead Time Address
Interface
22.22.22.22 0 FULL/DROTHER 00:00:32 1.1.1.2
Serial0/0.1
33.33.33.33 0 FULL/DROTHER 00:00:33 1.1.1.3
Serial0/0.1
44.44.44.44 0 FULL/DROTHER 00:00:34 1.1.1.4
Serial0/0.1
55.55.55.55 0 FULL/DROTHER 00:00:39 1.1.1.5
Serial0/0.1
HUB#
HUB#sh ip route ospf
111.0.0.0/24 is subnetted, 1
subnets
O IA 111.1.1.0 [110/65] via 1.1.1.2, 00:30:29, Serial0/0.1
HUB#
============================================
Spoke 2
Spoke-2#sh run int s0/0
Building configuration...
Current configuration : 69 bytes
!
interface
Serial0/0
no ip address
encapsulation frame-relay
end
Spoke-2#sh run int
s0/0.1
Building configuration...
Current configuration : 133 bytes
!
interface Serial0/0.1 point-to-point
ip address 1.1.1.3 255.255.255.0
ip
ospf priority 0
frame-relay interface-dlci 301
end
router ospf 11
log-adjacency-changes
network 1.1.1.0 0.0.0.255 area 0
network 33.33.33.33
0.0.0.0 area 0
Spoke-2#sh ip route ospf
Spoke-2#sh ip ospf nei
Neighbor
ID Pri State Dead Time Address Interface
12.2.2.1
0 FULL/ - 00:00:38 1.1.1.1 Serial0/0.1
Spoke-2#
Spoke-2#sh ip ospf database
OSPF Router with ID (33.33.33.33)
(Process ID 11)
Router Link States (Area 0)
Link ID
ADV Router Age Seq# Checksum Link count
12.2.2.1
12.2.2.1 988 0x8000000B 0x005032 2
22.22.22.22 22.22.22.22
1926 0x80000006 0x002B09 1
33.33.33.33 33.33.33.33 1285
0x80000009 0x00FBE7 3
44.44.44.44 44.44.44.44 261 0x80000003
0x00BBC9 1
55.55.55.55 55.55.55.55 329 0x80000004 0x00CA13 3
Net Link States (Area 0)
Link ID ADV Router Age Seq#
Checksum
1.1.1.1 12.2.2.1 235 0x80000006 0x009305
Summary Net Link States (Area 0)
Link ID ADV Router Age
Seq# Checksum
111.1.1.0 22.22.22.22 1922 0x80000001
0x003D35
!
===========================================================
Spoke
3 [where the 111.1.1.0 is installed.. ]
Spoke-3#sh ip ospf database
OSPF Router with ID (44.44.44.44) (Process ID 11)
Router Link
States (Area 0)
Link ID ADV Router Age Seq#
Checksum Link count
12.2.2.1 12.2.2.1 1073 0x8000000B
0x005032 2
22.22.22.22 22.22.22.22 74 0x80000007 0x00290A 1
33.33.33.33 33.33.33.33 1371 0x80000009 0x00FBE7 3
44.44.44.44
44.44.44.44 343 0x80000003 0x00BBC9 1
55.55.55.55 55.55.55.55
413 0x80000004 0x00CA13 3
Net Link States (Area 0)
Link ID ADV Router Age Seq# Checksum
1.1.1.1
12.2.2.1 319 0x80000006 0x009305
Summary Net
Link States (Area 0)
Link ID ADV Router Age Seq#
Checksum
111.1.1.0 22.22.22.22 74 0x80000002 0x003B36
Spoke-3#
Spoke-3#sh run int s0/0
Building configuration...
Current
configuration : 177 bytes
!
interface Serial0/0
ip address 1.1.1.4
255.255.255.0
encapsulation frame-relay
ip ospf hello-interval 10
ip ospf
priority 0
frame-relay map ip 1.1.1.1 401 broadcast
end
Spoke-3#
Spoke-3#
Spoke-3#sh ip route ospf
111.0.0.0/24 is subnetted, 1 subnets
O IA
111.1.1.0 [110/65] via 1.1.1.2, 00:34:16, Serial0/0
11.0.0.0/32 is
subnetted, 1 subnets
O 11.11.11.11 [110/65] via 1.1.1.1, 00:34:16,
Serial0/0
Spoke-3#
Thanks,
Vidhya
This archive was generated by hypermail 2.1.4 : Sun Nov 06 2005 - 22:00:49 GMT-3