From: JP (jenseike@start.no)
Date: Mon Oct 10 2005 - 05:17:08 GMT-3
Hi group..
I am setting up a cuople of routers with SDM management. I have configured
this on the routers :
username xxxxxxxx privilege 15 secret 5 $1$Bd4I$lhIWF//cR0CoXbhG6snNL0
no ip http server
ip http access-class 1
ip http authentication local
ip http secure-server
ip http timeout-policy idle 600 life 86400 requests 10000
line con 0
privilege level 15
logging synchronous
line aux 0
line vty 0 4
exec-timeout 10 20
privilege level 15
login local
transport input telnet ssh
line vty 5 15
exec-timeout 10 20
privilege level 15
login local
transport input telnet ssh
When I start up the SDM application, I get only the basic options, and have
not posibilitys for configuring firewall, qos, vpn, routing and so..
Why is this, I am looking at the documentation, and it does not say anyhting
about needing extra sw for this options to appear, and even in the download
page, from where I downloaded the sw, there seems to be no addition to the
standar sw..
So, can anybody tell me what I need to do to make this work, and also have I
done the config on the router correct?.
Jens P
This archive was generated by hypermail 2.1.4 : Sun Nov 06 2005 - 22:00:50 GMT-3