From: Kelly Scroggins (kelly@cliffhanger.com)
Date: Sat Oct 15 2005 - 18:11:48 GMT-3
The reload command ...
1#reload ?
LINE Reason for reload
at Reload at a specific time/date
cancel Cancel pending reload
in Reload after a time interval
<cr>
1#reload at ?
hh:mm Time to reload (hh:mm)
1#reload in ?
Delay before reload (mmm or hhh:mm)
-- kelly http://home1.gte.net/res0psau/index.html#Hang-Gliding-Stuff-- -- \ / \/ /\ / \ -- --
Quoting Michael Calhoon <mcalhoon27@gmail.com>: Hi Guys, I am currently interviewing with a firm and I was given some "homework" to research. Here is the situation: you are configuring a router in a remote office and you make a mistake which inadvertently disconnects you from the router. Perhaps you configured an access list wrong or typed in the wrong IP address. You need to do a reboot of the router to reset the config, but there is no backup modem or person on-site to do the reboot for you, and you do not want to travel to the site to do it yourself. What can you put into place before starting the config that will allow you to do a remote reboot if you run into this situation? I have a lot of experience prepping for the lab exam, but my production environment experience is limited. I was hoping to hear what people on groupstudy do. My first thought would be to use SNMP. Any other thoughts? Thanks, Mike _______________________________________________________________________ Subscription information may be found at: http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sun Nov 06 2005 - 22:00:51 GMT-3