From: Gary (cisco.wizard@virgin.net)
Date: Sat Oct 22 2005 - 21:42:59 GMT-3
Neither Caslow or the cisco website seem to say you should do it both ends.
I would like to know too.
----- Original Message -----
From: "George Amen" <george.amen@gmail.com>
To: "Cisco certification" <ccielab@groupstudy.com>
Sent: Saturday, October 22, 2005 9:08 AM
Subject: FRTS: On one end or both?
> R1-s0---------FR Cloud-------------s0-R2
>
> I understand that it all depends on the wording of the qs, but in
> general if the qs starts like this "Configure R1".. and we are asked
> to fix an on-going congestion issue between R1 and R2 using FRTS by
> using a pre-defined set of CIR, AR, BE, TC, BECN,. (calculate BC)...
> would I be applying this "FR map-class" on both ends or just R1-s0 ?
>
> Unless both end have the same CIR, BE, BC etc,.. it doesnt even make
> sense to ask this qs,,, but lets say they are the same...... and what
> if they both have different parameters.....? I've recently managed to
> understand how to calculate all the above FR parameters... just
> missing the application in various scenario....
>
> any help would be appreciated.
>
> -GA
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sun Nov 06 2005 - 22:00:52 GMT-3