From: Dennis J. Hartmann (dennisjhartmann@hotmail.com)
Date: Wed Nov 09 2005 - 21:23:37 GMT-3
Version 1 is the default. I wanted to make sure everyone knows that
because this is not clear when using the show vtp status command. This
command will show VTP V2 Mode, but next to V2, it will display Disabled (see
below).
Switch> show vtp status
VTP Version : 2
Configuration Revision : 0
Maximum VLANs supported locally : 1005
Number of existing VLANs : 5
VTP Operating Mode : Server
VTP Domain Name :
VTP Pruning Mode : Disabled
VTP V2 Mode : Disabled
VTP Traps Generation : Disabled
MD5 digest : 0xBF 0x86 0x94 0x45 0xFC 0xDF 0xB5 0x70
Configuration last modified by 0.0.0.0 at 0-0-00 00:00:00
Local updater ID is 172.20.135.196 on interface Vl1 (lowest numbered VLAN
interface found)
Sincerely,
Dennis Hartmann
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
brussels
Sent: Tuesday, June 07, 2005 6:26 AM
To: Lee.Donald@t-systems.co.uk
Cc: noble@inserviceindia.com; ccielab@groupstudy.com
Subject: RE: VTP Question
This is not enough. All lab scenarios for training have trunk ports (either
two trunks or one ether-channel) and therefore VTP packets will be sent out
and recieved on some ports.
The solution is to set VTP mode to transparent and version 1. (V2 VTP switch
transparently forwards VTP packets, while V1 doesn't)
>Noble,
>
>I would deduce from this question that it wants to change each port to
>"switchport Access" mode so that VTP frames are not sent out, by
>default all ports will be dynamic.
>
>Regards
>
>Lee.
>
>
>
>-----Original Message-----
>From: T. N. Noble [mailto:noble@inserviceindia.com]
>Sent: 07 June 2005 10:51
>To: ccielab@groupstudy.com
>Subject: VTP Question
>
>Hello Group,
>
>Can anybody help me to understand the following question correctly?
>
>"Restrict the VTP Traffic from reaching all the 24 fast Ethernet ports
>of the switch". Is this question talking about VTP Pruning? I
>understand that the VTP pruning is related to Trunks where as here the
>switch ports are in Access Mode.
>
>Thanks,
>
>Noble
>
>_______________________________________________________________________
>Subscription information may be found at:
>http://www.groupstudy.com/list/CCIELab.html
>
>_______________________________________________________________________
>Subscription information may be found at:
>http://www.groupstudy.com/list/CCIELab.html
-- sEGODNQ UDA^NYJ DENX, ^TOBY ZAWESTI PO^TU NA qNDEKSE http://mail.yandex.ru
This archive was generated by hypermail 2.1.4 : Thu Dec 01 2005 - 09:12:06 GMT-3