frame-relay interface-dlci with 'protocol ip' extension

From: Danny Cox (dandermanuk@gmail.com)
Date: Wed Nov 16 2005 - 19:35:34 GMT-3

• Next message: John Matus: "prefix filtering w/ access-list.......stumped"
• Previous message: Lee Gillespie: "RE: My turn !"
• Next in thread: Chris Lewis: "Re: frame-relay interface-dlci with 'protocol ip' extension"
• Maybe reply: Chris Lewis: "Re: frame-relay interface-dlci with 'protocol ip' extension"
• Maybe reply: Danny Cox: "Re: frame-relay interface-dlci with 'protocol ip' extension"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

I'm doing a lab at the minute which requires that I do not use
frame-relay map statements. According to the master index for 12.2
there's an extension to the frame-relay map statement which allows me
to specify 'protocol ip <address>' but only if I'm using it as a bootp
server. Other than enabling ip bootp-server, which makes no
difference, it's not obvious to me what else I'd need ... anyone else
used this ?

cheers
Danny

• Next message: John Matus: "prefix filtering w/ access-list.......stumped"
• Previous message: Lee Gillespie: "RE: My turn !"
• Next in thread: Chris Lewis: "Re: frame-relay interface-dlci with 'protocol ip' extension"
• Maybe reply: Chris Lewis: "Re: frame-relay interface-dlci with 'protocol ip' extension"
• Maybe reply: Danny Cox: "Re: frame-relay interface-dlci with 'protocol ip' extension"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Dec 01 2005 - 09:12:07 GMT-3