From: Primetek_Easyman (easyman@primetek.com.tw)
Date: Wed Nov 30 2005 - 06:24:49 GMT-3
I think it probably not.
I have experience of putting "route add 0.0.0.0 mask 0.0.0.0 x.x.x.x" on my
windows machine.
I saw it did have two default-route in the routing table.
But the first entry will always be used even though it is not reachable.
You can simply do the test on your PC.
HTH.
Lin
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
steven richards
Sent: Wednesday, November 30, 2005 10:43 AM
To: ccielab@groupstudy.com
Subject: DHCP and default router command
I have a question on using the default router command with DHCP. It looks
like you can specify multiple default routers up to 8 according to Cisco. So
in configuring these extra default routers what is this for. Would this be
like if one of the default routers is unreachable you fail over to the
second one configured and keep going down the list for the default routers
you have configured
Thanks in advance
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/fipr
_c/ipcprt1/1cfdhcp.htm
This archive was generated by hypermail 2.1.4 : Thu Dec 01 2005 - 09:12:08 GMT-3