From: joshua lauer (jslauer@hotmail.com)
Date: Wed Dec 07 2005 - 22:00:40 GMT-3
That would match everything in the default class, which is ...everything :)
jl
----- Original Message -----
From: "Mike Flanagan" <mikenoc@mindspring.com>
To: "Cisco certification" <ccielab@groupstudy.com>
Sent: Wednesday, December 07, 2005 7:46 PM
Subject: CBWFQ question
> If I just wanted to match all traffic using CBWFQ could I do the
> following withought using a class-map ? Could I use this below
> command to match all traffic coming in on this switch port ? What if
> I wanted to match all traffic in a given VLAN. Would the best way be
> to add this under the SVI interface or maybe just add the same policy
> map to each port in the VLAN ?
>
> Thanks in advance,
>
> Mike F.
>
> policy-map CBWFQ
> class class-default
> set my value here
>
> int gig1/0/1
> service-policy input CBWFQ
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Mon Jan 09 2006 - 07:07:50 GMT-3