From: John Matus (John.Matus@tokiom.com)
Date: Thu Dec 08 2005 - 20:07:27 GMT-3
what would the technical difference be between:
int s0/0
fair-queue
and
int s0/0
frame interface 111
class frts
map-class frame-relay frts
frame-relay fair-queue
would the 1st just apply fair-queue to everything under the interface and
the 2nd would do it on a per/DLCI basis? ....but both accomplish the same
thing?
Regards,
John D. Matus
Technical Support / PAS
Fujitsu Consulting
626-568-7716
John.Matus@tokiom.com
========================================================================================================
This e-mail is intended solely for the individual to whom it is
addressed. The information contained in this transmission contains
confidential and/or proprietary information or is otherwise privileged. If
the reader of this message is not the intended recipient, please be advised
that any dissemination, distribution or copying of this transmission is
strictly prohibited. If you have received this e-mail in error, please
notify us immediately by returning it to the sender and deleting this copy
from your system. Thank you for your cooperation.
========================================================================================================
This archive was generated by hypermail 2.1.4 : Mon Jan 09 2006 - 07:07:50 GMT-3