From: Bob Sinclair (bob@bobsinclair.net)
Date: Sat Dec 17 2005 - 18:31:33 GMT-3
KSGoh,
The equipment we use for the latest NMC labs is listed below. Certainly
substitutions can be made, as long as you can get a similar number of
interfaces and topology. As others have said, you can gain a lot by
stretching your equipment as far as it will go. Also as others have said,
MOST of what you need to know can be practiced on 2500 routers if necessary.
You could then reserve rack time to practice more advanced labs on the exact
equipment.
Device IOS version
R1 IOS (tm) 3600 Software (C3640-JK9O3S-M), Version 12.4(5)
R2 IOS (tm) 3600 Software (C3640-JK9O3S-M), Version 12.4(5)
R3 IOS (tm) C2600 Software (C2600-J1S3-M), Version 12.3(15a)
R4 IOS (tm) C2600 Software (C2600-J1S3-M), Version 12.3(15a)
R5 IOS (tm) 3600 Software (C3640-JK9O3S-M), Version 12.4(5)
R6 IOS (tm) 3600 Software (C3640-JK9O3S-M), Version 12.4(5)
FRS IOS (tm) 2500 Software (C2500-JS-L), Version 12.2(27)
CAT1 IOS (tm) C3550 Software (C3550-IPSERVICESK9-M), Version 12.2(25)SED
CAT2 IOS (tm) C3550 Software (C3550-IPSERVICESK9-M), Version 12.2(25)SED
Hope that helps,
Bob Sinclair
CCIE #10427, CCSI 30427
www.netmasterclass.net
----- Original Message -----
From: KSGoh
To: Cisco certification
Sent: Thursday, December 15, 2005 10:23 AM
Subject: LAB WB!!
i'm looking for a suitable lab workbook to be used for my lab..
as a poor student, i only manage to get a total of 7 x 2500 routers from
ebay,
and i did a search from internet, surprising knowing that most workbook did
not written to be run from 2500 routers....
i think i should NOT be the only one who did use 2500 in the home lab..
will there be any different if i replaced those 38xx or 26xx router will
2500
?
will i get different result? or how should i changed or is there any
workbook
which are written to be run from 2500 routers?
_______________________________________________________________________
Subscription information may be found at:
http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Mon Jan 09 2006 - 07:07:51 GMT-3