From: Bob Sinclair (bob@bobsinclair.net)
Date: Sun Dec 18 2005 - 19:30:05 GMT-3
Hi Arun,
The NMC DOiT labs require just six routers and two 3550 switches.
Hope that helps,
Bob Sinclair
CCIE #10427, CCSI 30427
www.netmasterclass.net
----- Original Message -----
From: Arun Arumuganainar
To: Bob Sinclair ; KSGoh ; Cisco certification
Sent: Sunday, December 18, 2005 1:20 AM
Subject: Re: LAB WB!!
BOB what about Routers for Backbone !!!
You need to add atleast one router for backbone and ideally 3 !!!
Thanks and Regards
Arun
----- Original Message -----
From: "Bob Sinclair" <bob@bobsinclair.net>
To: "KSGoh" <kianseng.goh@gmail.com>; "Cisco certification"
<ccielab@groupstudy.com>
Sent: Sunday, December 18, 2005 3:01 AM
Subject: Re: LAB WB!!
> KSGoh,
>
> The equipment we use for the latest NMC labs is listed below. Certainly
> substitutions can be made, as long as you can get a similar number of
> interfaces and topology. As others have said, you can gain a lot by
> stretching your equipment as far as it will go. Also as others have
said,
> MOST of what you need to know can be practiced on 2500 routers if
necessary.
> You could then reserve rack time to practice more advanced labs on the
exact
> equipment.
>
> Device IOS version
> R1 IOS (tm) 3600 Software (C3640-JK9O3S-M), Version 12.4(5)
> R2 IOS (tm) 3600 Software (C3640-JK9O3S-M), Version 12.4(5)
> R3 IOS (tm) C2600 Software (C2600-J1S3-M), Version 12.3(15a)
> R4 IOS (tm) C2600 Software (C2600-J1S3-M), Version 12.3(15a)
> R5 IOS (tm) 3600 Software (C3640-JK9O3S-M), Version 12.4(5)
> R6 IOS (tm) 3600 Software (C3640-JK9O3S-M), Version 12.4(5)
> FRS IOS (tm) 2500 Software (C2500-JS-L), Version 12.2(27)
> CAT1 IOS (tm) C3550 Software (C3550-IPSERVICESK9-M), Version 12.2(25)SED
> CAT2 IOS (tm) C3550 Software (C3550-IPSERVICESK9-M), Version 12.2(25)SED
>
> Hope that helps,
>
> Bob Sinclair
> CCIE #10427, CCSI 30427
> www.netmasterclass.net
>
> ----- Original Message -----
> From: KSGoh
> To: Cisco certification
> Sent: Thursday, December 15, 2005 10:23 AM
> Subject: LAB WB!!
>
>
> i'm looking for a suitable lab workbook to be used for my lab..
>
> as a poor student, i only manage to get a total of 7 x 2500 routers
from
> ebay,
> and i did a search from internet, surprising knowing that most workbook
did
> not written to be run from 2500 routers....
>
> i think i should NOT be the only one who did use 2500 in the home lab..
>
> will there be any different if i replaced those 38xx or 26xx router
will
> 2500
> ?
> will i get different result? or how should i changed or is there any
> workbook
> which are written to be run from 2500 routers?
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
_______________________________________________________________________
Subscription information may be found at:
http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Mon Jan 09 2006 - 07:07:51 GMT-3