From: John Matus (John.Matus@tokiom.com)
Date: Mon Dec 19 2005 - 22:25:45 GMT-3
ok wred requirement "there must be a bandwidth reservation within a class
or wred must be in the class-default....................
with this said, can you configure the following,( specfically referencing
class http)
do you have to have a bandwidth reserved in the "same" class as wred, or
can it be in a different class, as in class rtp below
class-map match-all rtp
match access-g 101
class-map match-all http
match pro www
access-list 101 permit tcp any any eq 1720
access-list 101 permit udp any any range 16384 32767
policy-map rtp
class rtp
priority percent 25
class http
random-detect
class class-default
fair-queue
Regards,
John D. Matus
Technical Support / PAS
Fujitsu Consulting
626-568-7716
John.Matus@tokiom.com
========================================================================================================
This e-mail is intended solely for the individual to whom it is
addressed. The information contained in this transmission contains
confidential and/or proprietary information or is otherwise privileged. If
the reader of this message is not the intended recipient, please be advised
that any dissemination, distribution or copying of this transmission is
strictly prohibited. If you have received this e-mail in error, please
notify us immediately by returning it to the sender and deleting this copy
from your system. Thank you for your cooperation.
========================================================================================================
This archive was generated by hypermail 2.1.4 : Mon Jan 09 2006 - 07:07:51 GMT-3