From: Robert (rjg@bitpath.net)
Date: Mon Jan 02 2006 - 13:02:03 GMT-3
Ahh, there is the answer I was looking for..
Thanks!
/Robert
Brian McGahan wrote:
> OSPFv3 is only in the Enterprise Plus feature set of the 2600s,
> not the IP Plus feature set. If you don't have enough flash then just
> boot the image from tftp.
>
>
> HTH,
>
> Brian McGahan, CCIE #8593
> bmcgahan@internetworkexpert.com
>
> Internetwork Expert, Inc.
> http://www.InternetworkExpert.com
> Toll Free: 877-224-8987 x 705
> Outside US: 775-826-4344 x 705
> 24/7 Support: http://forum.internetworkexpert.com
> Live Chat: http://www.internetworkexpert.com/chat/
>
>
>
>>-----Original Message-----
>>From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
>
> Of
>
>>Robert
>>Sent: Monday, January 02, 2006 1:21 AM
>>To: GroupStudy.com - CCIE Lab
>>Subject: Internetwork Expert v3 Lab Equipment
>>
>>All,
>>
>> Is there any particular reason that we could not use the IP Plus
>>image instead of the Enterprise Plus image for the equipment in the
>
> labs?
>
>> I ask because I can get an IP Plus image to fit in flash, but not
>
> an
>
>>Enterprise Plus image.
>>
>>/Robert
>>
>>
>
> _______________________________________________________________________
>
>>Subscription information may be found at:
>>http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Wed Feb 01 2006 - 07:45:47 GMT-3