From: loke (loke14@gmail.com)
Date: Tue Jan 10 2006 - 00:11:29 GMT-3
Ive noticed it doesnt show up sometimes too. Transparent mode heh... good to
know.
On 1/9/06, Brian McGahan <bmcgahan@internetworkexpert.com> wrote:
>
> It only shows up in the config if you're in VTP transparent mode.
>
> Brian McGahan, CCIE #8593
> bmcgahan@internetworkexpert.com
>
> Internetwork Expert, Inc.
> http://www.InternetworkExpert.com
> Toll Free: 877-224-8987 x 705
> Outside US: 775-826-4344 x 705
> 24/7 Support: http://forum.internetworkexpert.com
> Live Chat: http://www.internetworkexpert.com/chat/
>
>
> > -----Original Message-----
> > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
> Of
> > Chris Atkins
> > Sent: Monday, January 09, 2006 3:24 PM
> > To: CCIEin2006
> > Cc: Cisco certification
> > Subject: Re: VTP commands not shown in config on Cat3550?
> >
> > Looks like it is.
> >
> > Cheers
> >
> > Chris
> > ----- Original Message -----
> > From: CCIEin2006
> > To: Chris Atkins
> > Cc: Cisco certification
> > Sent: Monday, January 09, 2006 9:22 PM
> > Subject: Re: VTP commands not shown in config on Cat3550?
> >
> >
> > Yes I am in normal config mode. Maybe its the IOS version?
> >
> >
> > On 1/9/06, Chris Atkins <chris_atkins@blueyonder.co.uk> wrote:
> > were you in Vlan database mode if so try in normal conf t mode,
> works
> > for
> > me.
> >
> > version 12.1
> > no service single-slot-reload-enable
> > no service pad
> > service timestamps debug uptime
> > service timestamps log uptime
> > no service password-encryption
> > !
> > hostname Lab_S2
> > !
> > enable secret level 2 5 $1$UgGy$QvUo5y1FIDYCMJI3BisPj0
> > !
> > !
> > vlan 10
> > !
> > vlan 20
> > !
> > vlan 30
> > !
> > vlan 40
> > !
> > vlan 50
> > !
> > vlan 990
> > remote-span
> > ip subnet-zero
> > ip tcp synwait-time 5
> > no ip domain-lookup
> > !
> > vtp domain ccie
> > vtp mode transparent
> > mls qos
> >
> >
> > Cheers
> >
> > Chris
> > ----- Original Message -----
> > From: "CCIEin2006" <ciscocciein2006@gmail.com>
> > To: "Cisco certification" < ccielab@groupstudy.com>
> > Sent: Monday, January 09, 2006 9:01 PM
> > Subject: VTP commands not shown in config on Cat3550?
> >
> >
> > > Is there a reason why vtp configurations don't show up in the
> > config?
> > >
> > >
> > > Rack1SW1#sh run
> > > Building configuration...
> > >
> > > Current configuration : 2815 bytes
> > > !
> > > version 12.2
> > > no service pad
> > > service timestamps debug uptime
> > > service timestamps log uptime
> > > no service password-encryption
> > > !
> > > hostname Rack1SW1
> > > !
> > > enable password cisco
> > > !
> > > no aaa new-model
> > > ip subnet-zero
> > > ip routing
> > > no ip domain-lookup
> > > !
> > > !
> > > !
> > > !
> > > !
> > > !
> > > no file verify auto
> > > !
> > > spanning-tree mode pvst
> > > spanning-tree extend system-id
> > > spanning-tree vlan 16 priority 24576
> > > !
> > > vlan internal allocation policy ascending
> > > !
> > > !
> > > interface Loopback0
> > > ip address 150.1.7.7 255.255.255.0
> > > !
> > > interface GigabitEthernet0/1
> > > switchport access vlan 16
> > > !
> > > interface GigabitEthernet0/2
> > > switchport access vlan 2
> > > !
> > > interface GigabitEthernet0/3
> > > switchport access vlan 3
> > > !
> > > interface GigabitEthernet0/4
> > > switchport access vlan 4
> > > !
> > > interface GigabitEthernet0/5
> > > switchport access vlan 52
> > > !
> > > interface GigabitEthernet0/6
> > > switchport trunk encapsulation dot1q
> > > switchport trunk allowed vlan 16,36
> > > switchport mode trunk
> > > !
> > > interface GigabitEthernet0/7
> > > !
> > > interface GigabitEthernet0/8
> > > !
> > > interface GigabitEthernet0/9
> > > !
> > > interface GigabitEthernet0/10
> > > !
> > > interface GigabitEthernet0/11
> > > !
> > > interface GigabitEthernet0/12
> > > !
> > > interface GigabitEthernet0/13
> > > switchport trunk encapsulation isl
> > > switchport mode dynamic desirable
> > > !
> > > interface GigabitEthernet0/14
> > > switchport trunk encapsulation isl
> > > switchport mode dynamic desirable
> > > spanning-tree vlan 16 port-priority 112
> > > !
> > > interface GigabitEthernet0/15
> > > switchport trunk encapsulation isl
> > > switchport mode dynamic desirable
> > > spanning-tree vlan 16 port-priority 96
> > > !
> > > interface GigabitEthernet0/16
> > > !
> > > interface GigabitEthernet0/17
> > > !
> > > interface GigabitEthernet0/18
> > > !
> > > interface GigabitEthernet0/19
> > > !
> > > interface GigabitEthernet0/20
> > > !
> > > interface GigabitEthernet0/21
> > > !
> > > interface GigabitEthernet0/22
> > > !
> > > interface GigabitEthernet0/23
> > > !
> > > interface GigabitEthernet0/24
> > > switchport access vlan 63
> > > !
> > > interface GigabitEthernet0/25
> > > !
> > > interface GigabitEthernet0/26
> > > !
> > > interface GigabitEthernet0/27
> > > !
> > > interface GigabitEthernet0/28
> > > !
> > > interface Vlan1
> > > no ip address
> > > shutdown
> > > !
> > > interface Vlan7
> > > ip address 136.1.7.7 255.255.255.0
> > > !
> > > interface Vlan57
> > > ip address 136.1.57.7 255.255.255.0
> > > !
> > > router rip
> > > version 2
> > > network 136.1.0.0
> > > network 150.1.0.0
> > > no auto-summary
> > > !
> > > router bgp 200
> > > no synchronization
> > > bgp router-id 150.1.7.7
> > > bgp log-neighbor-changes
> > > neighbor 136.1.57.5 remote-as 200
> > > no auto-summary
> > > !
> > > ip classless
> > > ip http server
> > > ip http secure-server
> > > !
> > > !
> > > ip access-list standard CISCORO
> > > ip access-list standard CISCORW
> > > !
> > > snmp-server community RO RO CISCORO
> > > snmp-server community RW RO CISCORW
> > > snmp-server location San Jose, CA US
> > > snmp-server contact CCIE Lab SW1
> > > snmp-server chassis-id 221-787878
> > > snmp-server enable traps vtp
> > > snmp-server host 136.1.2.100 CISCOTRAP vtp
> > > !
> > > control-plane
> > > !
> > > !
> > > line con 0
> > > exec-timeout 0 0
> > > privilege level 15
> > > logging synchronous
> > > line vty 0 4
> > > password cisco
> > > login
> > > line vty 5 15
> > > password cisco
> > > login
> > > !
> > > !
> > > end
> > >
> > > Rack1SW1#
> > > Rack1SW1#
> > > Rack1SW1#show vtp status
> > > VTP Version : 2
> > > Configuration Revision : 0
> > > Maximum VLANs supported locally : 1005
> > > Number of existing VLANs : 15
> > > VTP Operating Mode : Server
> > > VTP Domain Name : IELAB
> > > VTP Pruning Mode : Enabled
> > > VTP V2 Mode : Disabled
> > > VTP Traps Generation : Enabled
> > > MD5 digest : 0xAE 0x7B 0xFD 0x55 0x53 0x5B
> 0x5B
> > 0x5E
> > > Configuration last modified by 136.1.7.7 at 3-1-93 01:36:15
> > > Local updater ID is 136.1.7.7 on interface Vl7 (lowest numbered
> VLAN
> > > interface found)
> > > Rack1SW1#
> > >
> > >
> >
> _______________________________________________________________________
> > > Subscription information may be found at:
> > > http://www.groupstudy.com/list/CCIELab.html
> >
> >
> _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Wed Feb 01 2006 - 07:45:48 GMT-3