Re: ebgp-multihop command without ttl value

From: Bill.McKenzie@bisys.com
Date: Wed Feb 08 2006 - 10:42:54 GMT-3

Next message: Chris Lewis: "Re: OT - MPLS"
Previous message: Jon Tucker: "RE: OT - MPLS"
Maybe in reply to: PANDI MOORTHY: "ebgp-multihop command without ttl value"
Next in thread: Ram Shummoogum: "Re: ebgp-multihop command without ttl value"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Yes

"Exceeding Client Expectations"

             PANDI MOORTHY
             <moorthypandi@gma
             il.com> To
             Sent by: Cisco certification
             nobody@groupstudy <ccielab@groupstudy.com>
             .com cc

                                                                   Subject
             02/08/2006 08:36 ebgp-multihop command without ttl
             AM value


             Please respond to
               PANDI MOORTHY
             <moorthypandi@gma
                  il.com>

Hi Group

BGP question:

To configure the BGP peering with two routers which has 2 or more hops
away,

Can I just configure the below multihop command without TTL limit. In
this case what will be the ttl value will be assigned to the packet??
(Is it 255??)

"Neighbor 10.108.1.1 ebgp-multihop"

Regards.
Pandi

Next message: Chris Lewis: "Re: OT - MPLS"
Previous message: Jon Tucker: "RE: OT - MPLS"
Maybe in reply to: PANDI MOORTHY: "ebgp-multihop command without ttl value"
Next in thread: Ram Shummoogum: "Re: ebgp-multihop command without ttl value"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Wed Mar 01 2006 - 11:28:17 GMT-3