From: Anderson Mota Alves (mota_anderson@hotmail.com)
Date: Sat Feb 11 2006 - 11:47:32 GMT-3
Hi Anwar,
From my understanding you are right, in order to apply to a singe VC you
have to use MQC and apply it to the VCs you want to using frame-relay
interface-dlci XXX command.
--------------------------------------------------------------------
From: Anwar Chalamannil <anwar.chalamannil@gmail.com>
Reply-To: Anwar Chalamannil <anwar.chalamannil@gmail.com>
To: ccielab@groupstudy.com
Subject: Shaping on a single VC
Date: Sat, 11 Feb 2006 18:00:11 +0400
>hello Group !
>I just want to clarify my understanding on frame realy traffic
shaping
>If I am doing FRTS ,shaping will be enabled on all the VCs. So If I
want to
>configure shaping only on a Single VC I have to use MQC based
traffic
>shaping . am I right ?
>
>
>policy-map shaping
>class class-default
>shape average 64000
>shape ada 32000
>
>map-class frame-relay FRTS
>service-policy shaping
>
>int s0/0
>frame-relay interface-dlci 320
>class FRTS
>
>Regards
>Anwar
>
>_______________________________________________________________________
>Subscription information may be found at:
>http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Wed Mar 01 2006 - 11:28:17 GMT-3