From: Bob Sinclair (bsinclair@netmasterclass.net)
Date: Mon Feb 13 2006 - 09:46:23 GMT-3
Jens,
Shaping active = no indicates that at the moment this command was entered
there were no packets in the shaping queue; note Queue Depth = 0.
Bytes/Packets delayed indicates number queued since last clearing of
statistics. So, traffic has been over the shaping target in the past, but was
not at this instant.
HTH,
Bob Sinclair
CCIE #10427, CCSI 30427
www.netmasterclass.net
----- Original Message -----
From: Jens Petter Eikeland
To: ccielab@groupstudy.com
Sent: Monday, February 13, 2006 5:51 AM
Subject: show policy map interface
Hi ,
When I do a show policy map interface command I get this output :
Class-map: 512-01 (match-any) (57051/2)
44379 packets, 20150779 bytes
5 minute offered rate 20000 bps, drop rate 0 bps
Match: access-group 101 (57055)
44379 packets, 20150779 bytes
5 minute rate 20000 bps
Traffic Shaping
Target Byte Sustain Excess Interval Increment Adapt
Rate Limit bits/int bits/int (ms) (bytes) Active
524288 16384 65536 65536 125 8192 -
Queue Packets Bytes Packets Bytes Shaping
Depth Delayed Delayed Active
0 61839 25830115 5687 5825097 no
What does the packets delayed and bytes delayed really means... Is this an
indication that this have been shaped to much?. I also wonder why it say
Shaping active = no ?
When you look at this output what do you see?
JP
_______________________________________________________________________
Subscription information may be found at:
http://www.groupstudy.com/list/CCIELab.html
_______________________________________________________________________
Subscription information may be found at:
http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Wed Mar 01 2006 - 11:28:17 GMT-3