RE: Dot1q-tunneling

From: Singh, Dennis (DSingh@flycsa.com)
Date: Fri Feb 17 2006 - 11:30:00 GMT-3

• Next message: Brian McGahan: "RE: RPF for Auto RP"
• Previous message: xprtofnet: "RPF for Auto RP"
• Maybe in reply to: Ice Fire: "Dot1q-tunneling"
• Next in thread: Schulz, Dave: "RE: Dot1q-tunneling"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

I think you can do this with Private vlan

-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Ice Fire
Sent: Thursday, February 16, 2006 9:41 PM
To: ccielab@groupstudy.com
Subject: Dot1q-tunneling

Guys -

I have a question regarding configuring multiple vlans to one router
port
with a single address.

            R1

             |

             |

            Sw1 ------- R2

            |

            |

            R3

R3 is in VLAN 20 with address 172.16.10.3 /25

R2 is in VLAN 10 with address 172.16.10.2 /25

R1 is in both VLANS with address 172.16.10.1 /25

I know it can be done, but I can't seem to find my lab where I have done
this before.

How can this be configured to work correctly?

Thanks

Ice Fire

• Next message: Brian McGahan: "RE: RPF for Auto RP"
• Previous message: xprtofnet: "RPF for Auto RP"
• Maybe in reply to: Ice Fire: "Dot1q-tunneling"
• Next in thread: Schulz, Dave: "RE: Dot1q-tunneling"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Wed Mar 01 2006 - 11:28:18 GMT-3