From: Bob Sinclair (bob@bobsinclair.net)
Date: Sat Feb 25 2006 - 00:40:04 GMT-3
Chris,
EF is decimal 46 and binary 101110 in the most significant 6 bits of the TOS
byte.
To get the TOS Byte value, add two more zeros to the end and convert to
decimal as an 8-bit value.
10111000 or 184 decimal
HTH,
Bob Sinclair
CCIE #10427, CCSI 30427
www.netmasterclass.net
----- Original Message -----
From: Chris Broadway
To: ccielab@groupstudy.com
Sent: Friday, February 24, 2006 10:08 PM
Subject: Tunnel TOS for IPV6
Task:
traffic is originating in Area 6 IPV6 OPSF and going to area 25 IPV6 OSPF.
There is an IPV6IP tunnel going through an ipv4 network connecting the two
IPV6 areas. This tunnel is IPV6 area 0. I have the requirement to tagged
all traffic going from area 6 destined for an IPV6 address with DSCP value
EF. Any ideas what the TOS byte should be set to?
_______________________________________________________________________
Subscription information may be found at:
http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Wed Mar 01 2006 - 11:28:18 GMT-3