From: Bob Sinclair (bob@bobsinclair.net)
Date: Mon Feb 27 2006 - 13:52:33 GMT-3
Yev,
Not sure if you want to go down this path, but 12.3T allows you to run SNMP
get commands within TCL. The output is in seconds of uptime.
R1(tcl)#snmp_getone private 1.3.6.1.4.1.9.9.43.1.1.1.0
{<obj oid='ccmHistory.1.0' val='5378794'/>}
R1(tcl)#
So this config was changed after 5378794 seconds of uptime. Which could be
subtracted from the current uptime, converted to seconds, to determine how
long ago it was changed :}
HTH,
Bob Sinclair
CCIE #10427, CCSI 30427
www.netmasterclass.net
----- Original Message -----
From: Evgeniy Voloshin
To: Alex
Cc: ccielab@groupstudy.com
Sent: Monday, February 27, 2006 10:08 AM
Subject: Re: timestamps startup config
Alex,
do you know some "show" commands to see this output via vty telnet
session on cisco router?
---
Yev.
Alex wrote:
> How about getting this info via SNMP? oid 1.3.6.1.4.1.9.9.43.1.1.1 ,
> "ccmHistoryRunningLastChanged",
> ftp://ftp.cisco.com/pub/mibs/oid/CISCO-CONFIG-MAN-MIB.oid .
> Just try it and see if it works for You.
> HTH
> Cheers
> Alex
>
> ----- Original Message -----
> From: <jnkmail4eva@yahoo.com>
> To: <ccielab@groupstudy.com>
> Sent: Monday, February 27, 2006 2:20 AM
> Subject: Re: RE: timestamps startup config
>
>
>> I tried that but I didn't get the same response as you suggested.
>> I have a 2610 with the following IOS and config
>> Cisco Internetwork Operating System Software
>> IOS (tm) C2600 Software (C2600-I-M), Version 12.3(17a)
>>
>> test# wri mem
>> Building configuration...
>> [OK]
>> test#sh run
>> Building configuration...
>>
>> Current configuration : 977 bytes
>> !
>> version 12.3
>> service timestamps debug datetime msec localtime show-timezone
>> service timestamps log datetime localtime show-timezone
>> no service password-encryption
>> !
>> hostname test
>> !
>> boot-start-marker
>> boot system flash c2600-i-mz.123-17a.bin
>> boot system flash c2600-i-mz.122-31.bin
>> boot-end-marker
>> !
>> !
>> no aaa new-model
>> ip subnet-zero
>> ip cef
>> !
>> !
>> !
>> !
>> !
>> !
>> !
>> interface Ethernet0/0
>> no ip address
>> half-duplex
>> !
>> interface Serial0/0
>> no ip address
>> clock rate 64000
>> !
>> interface Serial0/1
>> no ip address
>> shutdown
>> !
>> ip http server
>> ip classless
>> !
>> !
>> alias exec sir show ip route
>> alias exec sib show ip interface brief
>> alias exec sr show run
>> alias exec sion sh ip ospf nei
>> alias exec sien sh ip eigrp nei
>> alias exec srb sh run | begin router bgp
>> alias exec sre sh run | begin router eigrp
>> alias exec srr sh run | begin router rip
>> alias exec sro sh run | begin router ospf
>> alias exec sibgs sh ip bgp su
>> alias exec sibg sh ip bgp
>> !
>> line con 0
>> line aux 0
>> line vty 0 4
>> login local
>> !
>> !
>> end
>>
>> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html
>
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
_______________________________________________________________________
Subscription information may be found at:
http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Wed Mar 01 2006 - 11:28:18 GMT-3