From: amir cohen (avi_patish@yahoo.com)
Date: Sat Mar 04 2006 - 19:16:31 GMT-3
Guys,
Thank for the responsed, i will
try it:-)
--- NOUR Rabii <nour.rabii@marocconnect.com> wrote:
> Hi,
>
> Try This configuration:
>
> card type e1 1 1
>
> voice call carrier capacity active
>
> controller E1 1/0
> framing NO-CRC4
> pri-group timeslots 1-16
>
> interface Serial1/0:15
> no ip address
> no logging event link-status
> isdn switch-type primary-qsig
> isdn incoming-voice modem
> isdn guard-timer 3000
> isdn T203 30000
> isdn T310 60000
> no cdp enable
>
>
> voice-port 1/0:15
> cptone FR
> !
>
>
> E1 1/0 is up.
> Applique type is Channelized E1 - balanced
> No alarms detected.
> alarm-trigger is not set
> Version info Firmware: 20030723, FPGA: 255
> Framing is NO-CRC4, Line Code is HDB3, Clock
> Source is Line.
>
> Regadrs,
>
> Rabii NOUR
> Maroc Connect
>
> -----Message d'origine-----
> De : nobody@groupstudy.com
> [mailto:nobody@groupstudy.com] De la part de amir
> cohen
> Envoyi : jeudi 2 mars 2006 12:14
> @ : FORUM
> Objet : Controller E1 to PBX not working
>
> Hi Guys,
>
> I have a strange problem with a Voice Controller E1
> in
> a 3725 router.
>
> The problem is when i am creating the PRI time slots
> i
> am getting the d-channel as follow:
>
> controller E1 1/0
> pri-group timeslots 1-31
> !
> interface Serial1/0:15
> no ip address
> encapsulation hdlc =======> Why????????
> isdn switch-type primary-net5
> isdn incoming-voice voice
> no cdp enable
> end
>
> ======
>
>
> this is the cards that i have on the router:
>
>
>
> High Density Voice NM-HDV2-2T1/E1 Port adapter
>
>
> With 2 E1/T1 cards on board the above NM.
>
>
> ==============================
>
> Rouer IOS version:
>
> slot0:c3725-ipvoicek9-mz.124-4.T.bin
>
>
> Please help me to get the Encaplsulation HDLC off,
> And to activate the COnntroller with the PBX
>
>
>
> Thank You
>
>
> __________________________________________________
> Do You Yahoo!?
> Tired of spam? Yahoo! Mail has the best spam
> protection around
> http://mail.yahoo.com
>
>
This archive was generated by hypermail 2.1.4 : Sat Apr 01 2006 - 10:07:38 GMT-3