From: ccieim@comcast.net
Date: Mon Mar 06 2006 - 18:04:53 GMT-3
Hey Andrew/Group, Do you guys know how to make the span on the trunk port work instead of using remote span? My config does not work. Please help.
sw1(config)#do sh run int f0/24
Building configuration...
Current configuration : 95 bytes
!
interface FastEthernet0/24
switchport trunk encapsulation dot1q
switchport mode trunk
end
sw1(config)#do sh run | i monitor
monitor session 1 source interface Fa0/24
monitor session 1 filter vlan 10
monitor session 1 destination interface Fa0/20 ingress untagged vlan 10
sw1(config)#
Thanks in advance.
Don
-------------- Original message --------------
From: <atolstykh@atfam.com>
> Hello Andre,
>
> I would recommend CyscoExperts in Chicago for your CCIE: Security track.
> They will help you get the job done, totally worth the money.
>
> Regards,
> Andrew
>
> CCIE#14715 R&S/Security
>
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> Andre Scalco
> Sent: Sunday, March 05, 2006 11:56 AM
> To: ccielab@groupstudy.com
> Subject: CCIE Sec Bootcamp
>
> Hello Guys,
>
> I'm looking for a descent CCIE Sec Bootcamp here in The US. I know for a
> fact that some bootcamps for CCIE are really bad and people get really
> frustrated after pay a large amount of money and waste time.
>
> Based on that, what you guys recommend? I'm specially looking for people
> that did bootcamps after the major Cisco changes in Sec.
>
>
> Thanks!
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Apr 01 2006 - 10:07:38 GMT-3