From: Rafay Aslam (smrafay@gmail.com)
Date: Wed Mar 15 2006 - 18:03:34 GMT-3
it is the clock rate ....
On 3/15/06, Schulz, Dave <DSchulz@dpsciences.com> wrote:
>
> Group - I have a frame relay question..... on the following show frame
> map, it shows BW=256000. The documentation is a bit silent on this
> issue, but is this determined by the cir of the line, or, the clock
> speed that the interface is receiving. There is no bandwidth statement
> configured. TIA.
>
> MINN#sh frame map
> Serial0.302 (administratively down): point-to-point dlci, dlci
> 300(0x12C,0x48C0)
> , broadcast
> status deleted,
> RTP Header Compression (inherited), connections: 256
> Serial0.330 (up): point-to-point dlci, dlci 330(0x14A,0x50A0),
> broadcast, BW = 256000
> status defined, active,
> RTP Header Compression (inherited), connections: 256
>
> Dave
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Apr 01 2006 - 10:07:38 GMT-3