From: Schulz, Dave (DSchulz@dpsciences.com)
Date: Thu Mar 16 2006 - 10:18:01 GMT-3
Chris - This is a bit long, so I apologize for the length. Here is the
unedited show commands. Thanks!
MINN#sh run
Building configuration...
Current configuration : 2410 bytes
!
version 12.2
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname MINN
!
logging buffered 4096 debugging
enable secret 5 $1$h7ki$YbeBkXhidPMtT9oG2.DWY.
enable password epass
!
username CHGO password 0 chicago
clock timezone CST -6
ip subnet-zero
!
!
no ip domain lookup
ip host isdnchgo 192.168.254.41
!
ip cef
ip audit notify log
ip audit po max-events 100
!
isdn switch-type basic-ni
!
!
!
interface BRI0
ip address 192.168.254.42 255.255.255.252
encapsulation ppp
dialer idle-timeout 90
dialer map ip 192.168.254.41 name CHGO broadcast 18158363379
dialer load-threshold 3 outbound
dialer-group 1
isdn switch-type basic-ni
isdn spid1 65140502581111
isdn spid2 65140502621111
isdn T203 10000
no fair-queue
no cdp enable
ppp authentication chap
ppp multilink
!
interface FastEthernet0
ip address 192.168.110.1 255.255.255.0 secondary
ip address 172.18.0.1 255.255.0.0
ip helper-address 172.25.0.2
ip helper-address 172.16.21.1
ip probe proxy
speed 10
arp probe
no cdp enable
bridge-group 1
!
interface Serial0
no ip address
encapsulation frame-relay
no ip route-cache cef
no ip mroute-cache
no fair-queue
service-module t1 timeslots 1-12
arp probe
frame-relay ip rtp header-compression
!
interface Serial0.302 point-to-point
description Frame Relay to Chicago
bandwidth 384
ip address 192.168.254.10 255.255.255.252
no ip mroute-cache
shutdown
no cdp enable
frame-relay interface-dlci 300
frame-relay ip rtp header-compression
bridge-group 1
!
interface Serial0.330 point-to-point
description Frame Relay to CTI_Romeo
ip address 192.168.250.10 255.255.255.252
no ip mroute-cache
no cdp enable
frame-relay interface-dlci 330
frame-relay ip rtp header-compression
bridge-group 1
!
router eigrp 20
network 172.18.0.0
network 192.168.250.0
network 192.168.254.0
no auto-summary
no eigrp log-neighbor-changes
!
ip classless
ip route 0.0.0.0 0.0.0.0 192.168.250.9 250
ip route 172.25.0.0 255.255.0.0 192.168.254.41 242
ip route 172.28.0.0 255.255.0.0 192.168.254.41 242
no ip http server
!
!
access-list 100 deny eigrp any any
access-list 100 permit ip any any
dialer-list 1 protocol ip list 100
no cdp run
!
bridge 1 protocol ieee
!
line con 0
password rmsbus
logging synchronous
login
line aux 0
password rmsbus
login
line vty 0 4
password misvt
logging synchronous
login
!
end
MINN# sh ver
Cisco Internetwork Operating System Software
IOS (tm) C1700 Software (C1700-NO3SY7-M), Version 12.2(11)T11, RELEASE
SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2004 by cisco Systems, Inc.
Compiled Wed 14-Apr-04 16:22 by hqluong
Image text-base: 0x80008124, data-base: 0x80C6242C
ROM: System Bootstrap, Version 12.2(7r)XM2, RELEASE SOFTWARE (fc1)
ROM: C1700 Software (C1700-NO3SY7-M), Version 12.2(11)T11, RELEASE
SOFTWARE (fc1)
MINN uptime is 1 week, 5 days, 13 hours, 47 minutes
System returned to ROM by power-on
System image file is "flash:c1700-no3sy7-mz.122-11.t11.bin"
cisco 1721 (MPC860P) processor (revision 0x300) with 58983K/6553K bytes
of memory.
Processor board ID FOC081538NL (2911319025), with hardware revision 0000
MPC860P processor: part number 5, mask 2
Bridging software.
X.25 software, Version 3.0.0.
Basic Rate ISDN software, Version 1.1.
1 FastEthernet/IEEE 802.3 interface(s)
1 Serial network interface(s)
1 ISDN Basic Rate interface(s)
WIC T1-DSU
32K bytes of non-volatile configuration memory.
32768K bytes of processor board System flash (Read/Write)
Configuration register is 0x2102
MINN#sh frame map
Serial0.302 (administratively down): point-to-point dlci, dlci
300(0x12C,0x48C0), broadcast
status deleted,
RTP Header Compression (inherited), connections: 256
Serial0.330 (up): point-to-point dlci, dlci 330(0x14A,0x50A0),
broadcast, BW = 256000
status defined, active,
RTP Header Compression (inherited), connections: 256
MINN#sh frame pvc
PVC Statistics for interface Serial0 (Frame Relay DTE)
Active Inactive Deleted Static
Local 1 0 1 0
Switched 0 0 0 0
Unused 0 0 0 0
DLCI = 300, DLCI USAGE = LOCAL, PVC STATUS = DELETED, INTERFACE =
Serial0.302
input pkts 0 output pkts 0 in bytes 0
out bytes 0 dropped pkts 0 in pkts dropped 0
out pkts dropped 0 out bytes dropped 0
in FECN pkts 0 in BECN pkts 0 out FECN pkts 0
out BECN pkts 0 in DE pkts 0 out DE pkts 0
out bcast pkts 0 out bcast bytes 0
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
pvc create time 1w5d, last time pvc status changed 1d04h
DLCI = 330, DLCI USAGE = LOCAL, PVC STATUS = ACTIVE, INTERFACE =
Serial0.330
input pkts 489643 output pkts 301311 in bytes 64961329
out bytes 19931415 dropped pkts 0 in pkts dropped 0
out pkts dropped 0 out bytes dropped 0
in FECN pkts 6096 in BECN pkts 0 out FECN pkts 0
out BECN pkts 0 in DE pkts 0 out DE pkts 0
out bcast pkts 13183 out bcast bytes 843320
5 minute input rate 13000 bits/sec, 12 packets/sec
5 minute output rate 6000 bits/sec, 8 packets/sec
pvc create time 1w5d, last time pvc status changed 1d04h
MINN#sh int s0
Serial0 is up, line protocol is up
Hardware is PQUICC with Fractional T1 CSU/DSU
MTU 1500 bytes, BW 768 Kbit, DLY 20000 usec,
reliability 255/255, txload 1/255, rxload 3/255
Encapsulation FRAME-RELAY, loopback not set
Keepalive set (10 sec)
ARP type: PROBE
LMI enq sent 6094, LMI stat recvd 6094, LMI upd recvd 0, DTE LMI up
LMI enq recvd 0, LMI stat sent 0, LMI upd sent 0
LMI DLCI 1023 LMI type is CISCO frame relay DTE
FR SVC disabled, LAPF state down
Broadcast queue 0/64, broadcasts sent/dropped 13187/0, interface
broadcasts 13187
Last input 00:00:00, output 00:00:00, output hang never
Last clearing of "show interface" counters 16:55:44
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: fifo
Output queue :0/40 (size/max)
5 minute input rate 10000 bits/sec, 9 packets/sec
5 minute output rate 3000 bits/sec, 6 packets/sec
495798 packets input, 65052579 bytes, 0 no buffer
Received 69388 broadcasts, 0 runts, 0 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
307437 packets output, 20014614 bytes, 0 underruns
0 output errors, 0 collisions, 0 interface resets
0 output buffer failures, 0 output buffers swapped out
0 carrier transitions
DCD=up DSR=up DTR=up RTS=up CTS=up
Dave Schulz,
Email: dschulz@dpsciences.com <mailto:dschulz@dpsciences.com%20>
________________________________
From: Chris Lewis [mailto:chrlewiscsco@gmail.com]
Sent: Wednesday, March 15, 2006 5:26 PM
To: Schulz, Dave
Cc: ccielab@groupstudy.com
Subject: Re: Frame-relay BW statement question
This does not look right to me.
To my knowledge, there is nothing in IOS that connects clock rate to an
IOS displayed bandwidth statement.
Could you post the device configs and the unedited show command outputs?
On my routers I have a clock rate defined of 72000, however my show
commands display the following:
R1#sho fram map
Serial0/0.12 (up): point-to-point dlci, dlci 102(0x66,0x1860), broadcast
status defined, active
R1#sho int s0/0.12
Serial0/0.12 is up, line protocol is up
Hardware is PowerQUICC Serial
Internet address is 12.12.12.1/24
MTU 1500 bytes, BW 1544 Kbit, DLY 20000 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation FRAME-RELAY
Last clearing of "show interface" counters never
R1#
On 3/15/06, Schulz, Dave <DSchulz@dpsciences.com> wrote:
Group - I have a frame relay question..... on the following show frame
map, it shows BW=256000. The documentation is a bit silent on this
issue, but is this determined by the cir of the line, or, the clock
speed that the interface is receiving. There is no bandwidth statement
configured. TIA.
MINN#sh frame map
Serial0.302 (administratively down): point-to-point dlci, dlci
300(0x12C,0x48C0)
, broadcast
status deleted,
RTP Header Compression (inherited), connections: 256
Serial0.330 (up): point-to-point dlci, dlci 330(0x14A,0x50A0),
broadcast, BW = 256000
status defined, active,
RTP Header Compression (inherited), connections: 256
Dave
This archive was generated by hypermail 2.1.4 : Sat Apr 01 2006 - 10:07:39 GMT-3