From: John Matus (John.Matus@tokiom.com)
Date: Fri Mar 17 2006 - 17:27:43 GMT-3
guys,
having a problem w/ ospf adj's
hub & spoke topology, R5 is hub, R4 and R3 spokes. there is level 3
connectiviety between the spokes w/ map statements. ospf net type is
broadcast
R3 shows and init adj w/ R4, but R4 does not show an adj w/ R3
R3
*Mar 1 02:29:08.803: OSPF: Rcv hello from 150.1.4.4 area 0 from Serial0/1
183.1.0.4
*Mar 1 02:29:08.803: OSPF: End of hello processing
r3#
*Mar 1 02:29:11.399: OSPF: Send hello to 224.0.0.5 area 0 on Serial0/1
from 183.1.0.3
*Mar 1 02:29:12.303: OSPF: Rcv hello from 150.1.5.5 area 0 from Serial0/1
183.1.0.5
*Mar 1 02:29:12.303: OSPF: End of hello processing
R4
1 02:28:40.951: OSPF: Send hello to 224.0.0.5 area 0 on Serial0/0 from
183.1.0.4
r4#
*Mar 1 02:28:41.119: %SYS-5-CONFIG_I: Configured from console by console
r4#
*Mar 1 02:28:44.619: OSPF: Rcv hello from 150.1.5.5 area 0 from Serial0/0
183.1.0.5
*Mar 1 02:28:44.619: OSPF: End of hello processing
r4#
*Mar 1 02:28:50.951: OSPF: Send hello to 224.0.0.5 area 0 on Serial0/0
from 183.1.0.4
r4#
*Mar 1 02:28:54.619: OSPF: Rcv hello from 150.1.5.5 area 0 from Serial0/0
183.1.0.5
*Mar 1 02:28:54.619: OSPF: End of hello processing
r4#
don't know what coud be causing this
any ideas??
TIA
Regards,
John D. Matus
Technical Support / PAS
Fujitsu Consulting
626-568-7716
John.Matus@tokiom.com
========================================================================================================
This e-mail is intended solely for the individual to whom it is
addressed. The information contained in this transmission contains
confidential and/or proprietary information or is otherwise privileged. If
the reader of this message is not the intended recipient, please be advised
that any dissemination, distribution or copying of this transmission is
strictly prohibited. If you have received this e-mail in error, please
notify us immediately by returning it to the sender and deleting this copy
from your system. Thank you for your cooperation.
========================================================================================================
This archive was generated by hypermail 2.1.4 : Sat Apr 01 2006 - 10:07:39 GMT-3