From: Ed Lui (edwlui@gmail.com)
Date: Mon Mar 20 2006 - 19:13:43 GMT-3
John,
What about add the broadcast statement to the hub router ?
Edward
On 3/20/06, John Matus <John.Matus@tokiom.com> wrote:
> opps..........wrong R3 config
> interface Serial0/0
> ip address 183.1.123.3 255.255.255.0
> encapsulation frame-relay
> clockrate 2000000
> frame-relay map ip 183.1.123.1 302
> frame-relay map ip 183.1.123.2 302
> no frame-relay inverse-arp
> frame-relay lmi-type cisco
>
>
> Regards,
>
> John D. Matus
> Technical Support / PAS
> Fujitsu Consulting
> 626-568-7716
> John.Matus@tokiom.com
>
>
>
> "Joshua Lauer"
> <jslauer@hotmail.
> com> To
> "John Matus"
> 03/20/2006 02:01 <John.Matus@tokiom.com>
> PM cc
>
> Subject
> Re: dumb eigrp adj question
>
>
>
>
>
>
>
>
>
>
> John,
>
> Check out your IP address on the second
> spoke..........They are dupes.........
>
>
>
>
> JL
>
>
> Joshua Lauer
> CCNA, CCDA, CCNP, CCDP, CCSP, CCIP, RHCE, INFOSEC,
> CISSP, CEH
>
> ----- Original Message -----
> From: "John Matus" <John.Matus@tokiom.com>
> To: <ccielab@groupstudy.com>
> Sent: Monday, March 20, 2006 4:58 PM
> Subject: dumb eigrp adj question
>
>
> > ok, it's been awhile............
> >
> > hub and spoke eigrp in as 100 all on natural
> > interfaces
> > the hub and 1 spoke form an adj, muut the 2nd
> > spoke will not form the adj,
> > or rather, the 2nd spoke keeps dropping the adj
> > must the hub never show
> > that the adj was formed. i disabled
> > split-horizon, but i forget if there
> > is something else that i'm supposed to do
> >
> > R1- spoke
> > interface Serial0/0
> > bandwidth 1544
> > ip address 183.1.123.1 255.255.255.0
> > encapsulation frame-relay
> > frame-relay map ip 183.1.123.2 102 broadcast
> > frame-relay map ip 183.1.123.3 102
> > no frame-relay inverse-arp
> > frame-relay lmi-type cisco
> >
> > R2-hub
> > interface Serial0/0
> > ip address 183.1.123.2 255.255.255.0
> > encapsulation frame-relay
> > no ip split-horizon eigrp 100
> > frame-relay map ip 183.1.123.1 201 broadcast
> > frame-relay map ip 183.1.123.3 203 broadcast
> > no frame-relay inverse-arp
> >
> > R3- spoke (no adj)
> > interface Serial0/0
> > ip address 183.1.123.2 255.255.255.0
> > encapsulation frame-relay
> > no ip split-horizon eigrp 100
> > frame-relay map ip 183.1.123.1 201 broadcast
> > frame-relay map ip 183.1.123.3 203 broadcast
> > no frame-relay inverse-arp
> >
> >
> > layer 3 us up and both spokes can ping the hub and
> > the others spoke
> >
> >
> >
> > Regards,
> >
> > John D. Matus
> > Technical Support / PAS
> > Fujitsu Consulting
> > 626-568-7716
> > John.Matus@tokiom.com
> >
> ========================================================================================================
>
> > This e-mail is intended solely for the
> > individual to whom it is
> > addressed. The information contained in
> > this transmission contains
> > confidential and/or proprietary information or is
> > otherwise privileged. If
> > the reader of this message is not the intended
> > recipient, please be advised
> > that any dissemination, distribution or
> > copying of this transmission is
> > strictly prohibited. If you have received
> > this e-mail in error, please
> > notify us immediately by returning it to the
> > sender and deleting this copy
> > from your system. Thank you
> > for your cooperation.
> >
> ========================================================================================================
>
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Apr 01 2006 - 10:07:39 GMT-3