From: Alexei Monastyrnyi (alexeim@orcsoftware.com)
Date: Fri Mar 24 2006 - 10:58:30 GMT-3
in this scenario cos will never be set up cause it comes along with L2 
tagging only (dot1q, isl etc)  which is not applicable to s1/0 interface 
(which is serial, right?)
A.
on 24/03/2006 14:20 Bill.McKenzie@bisys.com wrote:
> Sorry, Here is the correct config
>
> class-map VIDEO
> match access-group VIDEOSERVER
>
> class-map VOICE
> match access-group VOICE
>
> policy-map VIDEO&VOICE
> class VIDEO
> set cos 1
> priority 640
> !
> class VOICE
> set dscp ef
> priority 384
>
>
>
>
> ip access-list extended VIDEOSERVER
> permit ip host X.X.X.X any
>
> ip access-list extended VOICE
> permit udp any any eq 16384 32767
>
>
>
> int s1/0
> service-policy output VIDEO&VOICE
>
>
>
>
> TIA,
> Bill
>
>
>
> Bill McKenzie
> Network Support
> BISYS Fund Services
> Work: 614.428.3293
> Cell: 614.425.2370
>
> "Exceeding Client Expectations"
>
>
>                                                                            
>              Bill                                                          
>              McKenzie/Columbus                                             
>              /BISYS                                                     To 
>                                        ccielab@groupstudy.com              
>              03/24/2006 08:03                                           cc 
>              AM                                                            
>                                                                    Subject 
>                                        QOS Config help                     
>                                                                            
>                                                                            
>                                                                            
>                                                                            
>                                                                            
>                                                                            
>
>
>
> Hi,
>
> I was wondering if there would be any problem with this QOS configuration
> that I'm just not seeing. Do to provider QOS options we must tag traffic in
> a certain way to make it end-to-end QOS through the provider cloud.
>
>
> class-map VIDEO
> match access-group VIDEOSERVER
>
> class-map VOICE
> match access-group VOICE
>
> policy-map VIDEO&VOICE
> class-map VIDEO
> set cos 1
> priority 640
> !
> class-map VOICE
> set dscp ef
> priority 384
>
>
>
>
> ip access-list extended VIDEOSERVER
> permit ip host X.X.X.X any
>
> ip access-list extended VOICE
> permit udp any any eq 16384 32767
>
>
>
> int s1/0
> service-policy output VIDEO&VOICE
>
>
>
>
> TIA,
> Bill
>
>
>
> ============================================
> STATEMENT OF CONFIDENTIALITY
>
> The information contained in this electronic message and any attachments to
> this message are intended for the exclusive use of the addressee(s) and may
> contain confidential or privileged information. No representation is made
> on its accuracy or completeness of the information contained in this
> electronic message.  Certain assumptions may have been made in the
> preparation of this material as of this date, and are subject to change
> without notice.  If you are not the intended recipient, you are hereby
> notified that any dissemination, distribution or copying of this e-mail and
> any attachment(s) is strictly prohibited.
>
> Please reply to the sender and destroy all copies of this message and any
> attachments from your system.
>
> ============================================
> STATEMENT OF CONFIDENTIALITY
>
> The information contained in this electronic message and any attachments to
> this message are intended for the exclusive use of the addressee(s) and may
> contain confidential or privileged information. No representation is made
> on its accuracy or completeness of the information contained in this
> electronic message.  Certain assumptions may have been made in the
> preparation of this material as of this date, and are subject to change
> without notice.  If you are not the intended recipient, you are hereby
> notified that any dissemination, distribution or copying of this e-mail and
> any attachment(s) is strictly prohibited.
>
> Please reply to the sender and destroy all copies of this message and any
> attachments from your system.
>
> _______________________________________________________________________
> Subscription information may be found at: 
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Apr 01 2006 - 10:07:40 GMT-3