From: Victor Cappuccio (cvictor@protokolgroup.com)
Date: Fri Mar 24 2006 - 14:54:09 GMT-3
Hola Amigo... That is strange
System configuration has been modified. Save? [yes/no]: yes
Building configuration...
[OK]
Proceed with reload? [confirm]
*Mar 1 21:34:53.574: %SYS-5-RELOAD: Reload requested by console.
*Mar 1 21:34:53.682: %OSPF-5-ADJCHG: Process 1, Nbr 5.5.5.5 on Serial0/0
from FULL to DOWN, Neighbor Down: Interface down or detached
*Mar 1 21:34:54.006: %BGP-5-ADJCHANGE: neighbor 136.1.15.5 Down Peer
closed the session
*Mar 1 21:34:54.006: %BGP-5-ADJCHANGE: neighbor 136.1.136.3 Down Peer
closed the session
*Mar 1 21:34:54.010: %BGP-5-ADJCHANGE: neighbor 136.1.136.6 Down Peer
closed the session
System Bootstrap, Version 12.1(3r)T2, RELEASE SOFTWARE (fc1)
Copyright (c) 2000 by cisco Systems, Inc.
C2600 platform with 65536 Kbytes of main memory
PC = 0xfff0ab6c, Vector = 0x500, SP = 0x80004884
monitor: command "boot" aborted due to user interrupt
rommon 1 > confreg
Configuration Summary
enabled are:
load rom after netboot fails
console baud: 9600
boot: image specified by the boot system commands
or default to: cisco2-C2600
do you wish to change the configuration? y/n [n]: y
enable "diagnostic mode"? y/n [n]:
enable "use net in IP bcast address"? y/n [n]:
disable "load rom after netboot fails"? y/n [n]:
enable "use all zero broadcast"? y/n [n]:
enable "break/abort has effect"? y/n [n]:
enable "ignore system config info"? y/n [n]:
change console baud rate? y/n [n]: y
enter rate: 0 = 9600, 1 = 4800, 2 = 1200, 3 = 2400
4 = 19200, 5 = 38400, 6 = 57600, 7 = 115200 [0]:
CCIEin2006 escribis:
Thanks - I don't see an option to change the console speed in rommon - does
anyone know the command?
On 3/22/06, Victor Cappuccio <cvictor@protokolgroup.com> wrote:
You can maybe change the console speed to 115200 and try xmodem with -y
option
Or Try uploading a small image and then copy the big image via FTP
HTH
Victor.
CCIEin2006 escribis:
Hey group,
I have a Cisco 3845 and the IOS image in flash is either corrupted or
has a
bug so the router is contiuosly reloading itself.
I tried downloading a new image using TFTP in rommon mode but
unfortuantely
it keeps timing out. For some reason TFTP cannot handle large file
transfers.
Is there another way I can download a new image? Right now I am using
XMODEM
and its probably going to take 13 hours to finish.
Any ideas? Thanks in advance!
_______________________________________________________________________
Subscription information may be found at: http://www.groupstudy.com/list/CCIELab.html
_______________________________________________________________________
Subscription information may be found at: http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Apr 01 2006 - 10:07:40 GMT-3