From: Nick Griffin (ngriffin@sio.midco.net)
Date: Fri Mar 31 2006 - 22:12:21 GMT-3
Try typing "router bgp 1" and push enter, see what you get. It will work
only with EMI.
KSGoh wrote:
> RE: 3560-EMI!huh?
> i got a SMI, but when i type router ?
> it does allow me to run all the protocol
> SW1(config)#router ?
> bgp Border Gateway Protocol (BGP)
> egp Exterior Gateway Protocol (EGP)
> eigrp Enhanced Interior Gateway Routing Protocol (EIGRP)
> isis ISO IS-IS
> iso-igrp IGRP for OSI networks
> mobile Mobile routes
> odr On Demand stub Routes
> ospf Open Shortest Path First (OSPF)
> rip Routing Information Protocol (RIP)
> ----- Original Message -----
> From: Faryar Zabihi (fzabihi)
> To: KSGoh ; Cisco certification
> Sent: Saturday, April 01, 2006 8:30 AM
> Subject: RE: 3560-EMI!
>
>
> No you need the emi...smi only has rip and static routes. You can upgrade
> to emi image from smi
> Faryar
>
>
> -----Original Message-----
> From: KSGoh [mailto:kianseng.goh@gmail.com]
> Sent: Fri Mar 31 19:27:41 2006
> To: Cisco certification
> Subject: 3560-EMI!
>
> any idea whats the diff between 3560 SMI and 3560 EMI? is SMI sufficient
> for
> home lab ?
>
> or alternately, if i get a SMI model from ebay, is it possible to upgrade
> to
> EMI ?
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Apr 01 2006 - 10:07:40 GMT-3