Re: How to detect routing loops

From: Petr Lapukhov (petrsoft@gmail.com)
Date: Mon Apr 03 2006 - 13:25:21 GMT-3


Hello again,

here is a draft revision of that paper :)
will appreciate any input :)

http://www.ksu.ru/petr/CCIE-RS-Notes-on-Redistribution-draft.txt

it's only a first revision, i'll try to keep it up to date with my ideas
as time pass.

 Working on Wiki stuff right now :)

2006/4/3, Petr Lapukhov <petrsoft@gmail.com>:
>
> Working on paper, regarding my thoughts on that complex topic..
> Planning to put it on public ASAP :))) and make Wiki access
> at the same time :)
>
> 2006/4/3, jellyboy <jellyboy@gmail.com>:
>
> > Hi Forum, I am going thru some of the various vendors' WB and I seem
> > to be hitting a brick wall. I am doing route redistribution to the
> > best of my ability, but I am not sure of a *logical* approach to test
> > for any routing loops. Could anyone please post a systematic approach
> > (if there is such a thing!) into once redistribution has been done to
> > test the topology for routing loops. I know this is a very general
> > question and that the commands will be different for the various
> > routing protocols..... I just need to be nudged in the right
> > direction.
> >
> > Many thx,
> >
> > JB
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html



This archive was generated by hypermail 2.1.4 : Mon May 01 2006 - 11:41:56 GMT-3