From: graham strydom (gstrydom74@ananzi.co.za)
Date: Wed Apr 05 2006 - 16:13:32 GMT-3
Thanks guys, Petr was correct as I was using the site-local
address instead of the link-local address. I have made the
changes and the adjs are now up.
On Wed, 5 Apr 2006 15:00:06 -0400
"Plank, Jason" <JPlank@concordefs.com> wrote:
>
http://www.cisco.com/univercd/cc/td/doc/product/software/ios123/123cgcr/ipv6
> _c/sa_ospf3.htm#wp1027254
>
> -------------------
> Jason Plank
> Network Engineer
> 101 Bellevue Parkway
> Wilmington, DE 19809
> E-mail: JPlank@concordefs.com
> Phone: 302-793-5913
>
>
> -----Original Message-----
> From: nobody@groupstudy.com
> [mailto:nobody@groupstudy.com] On Behalf Of
> gstrydom74@ananzi.co.za
> Sent: Wednesday, April 05, 2006 2:55 PM
> To: ccielab@groupstudy.com
> Subject: ospfv3 across NBMA
>
> Hi All,
>
> Has anyone been working with ipv6 ospf across nmba....I
> have been trying to
> get things going but no luck as cannot form adj across
> the network. works
> fine across broadcast network though.
>
> Thanks
> Graham
>
>
This archive was generated by hypermail 2.1.4 : Mon May 01 2006 - 11:41:56 GMT-3