From: Radioactive Frog (pbhatkoti@gmail.com)
Date: Sat Apr 08 2006 - 11:21:37 GMT-3
Hi Group,
The below is a scenario:-
PC1-----------------------ROUTER-1----------serial-------------------Router-2
------Switch
-------------PC-2 (192.168.2.3)
|--------------------PC-3 (192.168.2.4)
--------------------192.168.1.0/24--------
-------------------------192.168.2.0/24-----------------------
What is the best way to achieve the following goals without route map or
prefix list.
Just with plain extended list ? IN/OUT where which interface ?
1) From 192.168.1.0 to 192.168.2.0 - all types of traffic allowed.
2) From 192.168.1.0 to 192.168.2.3 - should have only telnet access, all
other type of traffic shouldn't allowed to 192.168.2.3
Answer with explanation are welcome, however any idea would be also good.
Regards,
Frog..
This archive was generated by hypermail 2.1.4 : Mon May 01 2006 - 11:41:56 GMT-3