From: Schulz, Dave (DSchulz@dpsciences.com)
Date: Sun May 07 2006 - 23:58:30 ART
John - You have to insure reachability to the peering address. So, you can do
it with standard routing protocols, static routes, or, which is usually the
case with eBGP...directly connected interfaces. HTH
Dave
________________________________
From: nobody@groupstudy.com on behalf of johngibson1541@yahoo.com
Sent: Sun 5/7/2006 10:54 PM
To: ccielab@groupstudy.com
Subject: iBGP doesn't peer if the only route is 0.0.0.0 ?
univercd says eBGP doesn't peer if the only route to the loopback interface is
the default route (0.0.0.0).
But I have trouble to do iBGP too.
If I add a static route, they peer immediately.
Any idea ?
John
This archive was generated by hypermail 2.1.4 : Thu Jun 01 2006 - 06:33:21 ART