From: CCIE KH49279 (ccie_lab@inetiq.com)
Date: Mon Jun 05 2006 - 13:37:52 ART
Redistribution and the use of the network command are mutually exclusive,
there is no dependency.
The only issue to realize when using redistribution, is that if any
interfaces are already in another protocol on the box in question and you
use redistirbute connected then you may have to manuyally put those
interfaces into their requisite protocol.
As for the interface level command, that is only valid if the version of IOS
in the lab supports that command.
Regards,
Wayne
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Duncan Maccubbin
Sent: Sunday, June 04, 2006 9:35 AM
To: Cisco certification
Subject: Re: ospf
If they say you can't use network then redistribution probably will not
work. The wording I tend to see is put network w.x.y.z in ospf area X
without using the network command. This would tell me A) redistribution is
probably not what they are looking for. B) I would go with interface command
IP OSPF 1 AREA X
Now if an area is not specified then redistribution is all good.
-----Original Message-----
>From: Pierre-Alex <paguanel@hotmail.com>
>Sent: Jun 4, 2006 11:17 AM
>To: Sami <sy1977@gmail.com>, Cisco certification <ccielab@groupstudy.com>
>Subject: Re: ospf
>
>Sami,
>
>Use the simplest method.
>
>If they tell you not to use "network" then use redistributed
>
>otherwise use "network"
>
>Cheers
>
>Pierre
>
>----- Original Message -----
>From: "Sami" <sy1977@gmail.com>
>To: "Cisco certification" <ccielab@groupstudy.com>
>Sent: Sunday, June 04, 2006 5:01 PM
>Subject: ospf
>
>
>> What is the best way of advertising loopback address in ospf , via
network
>> command or redistribute connected command ?
>> I always use network command but I have seen some of workbook use
>> redistribut connected for loopbacks.
>>
>> Thanks in advance.
>> Sami
>>
>> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html
>>
>>
>> --
>> No virus found in this incoming message.
>> Checked by AVG Free Edition.
>> Version: 7.1.394 / Virus Database: 268.8.1/355 - Release Date: 6/2/2006
>
>_______________________________________________________________________
>Subscription information may be found at:
>http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Jul 01 2006 - 07:57:32 ART