From: Leigh Harrison (ccileigh@gmail.com)
Date: Wed Jun 07 2006 - 07:34:41 ART
Hey there,
For the best example of configuring qos on a 3750 - run auto qos. Then
you can hack out the bits you want and tweak to your hearts content.
under an interface (eg f1/0/1) type: "auto qos voip [cisco-phone]"
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat3750/12225see/cr/cli1.htm#wp2737523
Enjoy
LH
ccie_sp@hotmail.com wrote:
> Hi guys,
>
> I've setup WRR on a cisco 3550, with one priority queue.
> On a 3750 WRR is not possible as far I know.
>
> Is SRR the new way of doing it?
>
> I want to have 4 queue's and setup the bandwidth per queue, but there MUST
> be one queue which is alway serviced before the others (for voice traffic) if the link is congested.
>
> so I want:
>
> queue1 cos value 0 1
> queue2 cos value 2 3
> queue3 cos value 4
> queue4 cos value 5 --> priority
>
> Where queue 4 gets 50% of the bandwidth (if congestion is occuring).
> and is priority queue
>
> queue 1 gets 50% of remaining bandwidth
> queue 2 gets 20% of remaining bandwidth
> queue 3 gets 30% of remaining bandwidth
>
> I cant find any good example on how to do this.
>
> Thanks for the help
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Jul 01 2006 - 07:57:32 ART