From: Daniel Fredrick (dfredrick@gmail.com)
Date: Sun Jun 11 2006 - 10:26:52 ART
I think they want you to use the "ip ospf 1 area 46" command on the vlan 46
interface on R6.
On 6/11/06, Aamir Aziz <aamiraz77@gmail.com> wrote:
>
> Hi there
>
> I was doing IEX vol 1 lab 1 task 3.3, it tells me to redistribute VLan 46
> into OSPF on R6 and not to use the network statement so i did this
> according
> to the solution:
>
> R6:
> router ospf 1
> router-id 150.1.6.6
> log-adjacency-changes
> redistribute connected route-map CONNECTED2OSPF
> network 150.1.6.6 0.0.0.0 area 46
> network 183.1.46.6 0.0.0.0 area 46
>
> ip prefix-list VLAN_6 seq 5 permit 183.1.6.0/24
> route-map CONNECTED2OSPF permit 10
> match ip address prefix-list VLAN_6
>
> pretty simple right? but no routes, i dont see this network anywhere in
> the
> OSPF domain or on any router but when i use the network command it comes
> ok
> no problem..so what am i missing here? or its just a typo error i made on
> the router.
>
> Thanks in advance
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Jul 01 2006 - 07:57:32 ART