From: Schulz, Dave (DSchulz@dpsciences.com)
Date: Mon Jun 12 2006 - 23:07:51 ART
Hey, Victor - I see that this is true. I tried following your link, but
could not find where in the documentation that this issue is detailed.
It would be nice to see where this issue is specifically called out.
Dave Schulz,
Email: dschulz@dpsciences.com
-----Original Message-----
From: Victor Cappuccio [mailto:cvictor@protokolgroup.com]
Sent: Monday, June 12, 2006 10:03 PM
To: Schulz, Dave; ccielab@groupstudy.com
Subject: RE: specific distance command in eigrp
Hi Dave
Yes, there is no way the change the Admin Distance for EIGRP External
routes.
http://www.cisco.com/en/US/products/ps6350/products_configuration_guide_
chap
ter09186a0080452963.html
Victor.
-----Mensaje original-----
De: nobody@groupstudy.com [mailto:nobody@groupstudy.com] En nombre de
Schulz, Dave
Enviado el: Lunes, 12 de Junio de 2006 09:22 p.m.
Para: ccielab@groupstudy.com
Asunto: specific distance command in eigrp
I was working on some redistribution and routing/distance issues with
eigrp. I noticed that the command to get a specific distance to change
on the routing process, "distance xxx <ip source> <mask> <acl>", will
only apply to eigrp routes that are internal, not external eigrp routes.
Please correct me if I am wrong on this. Labbed it up tonight and it
appears to be acting this way. Any thoughts?
Dave Schulz,
Email: dschulz@dpsciences.com <mailto:dschulz@dpsciences.com >
c
This archive was generated by hypermail 2.1.4 : Sat Jul 01 2006 - 07:57:32 ART