From: Victor Cappuccio (cvictor@protokolgroup.com)
Date: Tue Jun 13 2006 - 01:44:22 ART
Hi Guys, could this be a Bug?
Look at the IP Addresses at the Interfaces S0/0 and S0/1
Thanks
Victor.
Rack1R5#show ip int brief | ex un
Interface IP-Address OK? Method Status
Protocol
Ethernet0/0 152.1.125.5 YES manual up
up
Serial0/0 152.1.45.5 YES manual up
up
Serial0/1 152.1.45.5 YES manual up
up
Ethernet1/0 152.1.5.5 YES manual up
up
Loopback0 150.1.5.5 YES manual up
up
Rack1R5#show run
*Mar 1 07:22:27.241: %SYS-5-CONFIG_I: Configured from console by console
Rack1R5#show run int s0/0
Building configuration...
Current configuration : 179 bytes
!
interface Serial0/0
ip address 152.1.45.5 255.255.255.0
encapsulation frame-relay
no fair-queue
frame-relay map ip 152.1.45.4 504 broadcast
no frame-relay inverse-arp
end
Rack1R5#show run int s0/1
Building configuration...
Current configuration : 116 bytes
!
interface Serial0/1
ip address 152.1.45.5 255.255.255.0
encapsulation ppp
clock rate 64000
no cdp enable
end
Rack1R5#
This archive was generated by hypermail 2.1.4 : Sat Jul 01 2006 - 07:57:32 ART