From: Godswill Oletu (oletu@inbox.lv)
Date: Fri Jun 16 2006 - 08:12:51 ART
Prakash,
> Ex: If I need to summarize 169.10.1.0 - 169.10.15.255 but not include
> 169.10.7.X , how can I do this using minimum length commands ?
You might need about 4 summary statements to do that:
169.10.0.0 255.255.252.0
169.10.4.0 255.255.254.0
169.10.6.0 255.255.255.0
169.10.8.0 255.255.248.0
If you have the 169.10.6.0 route as a /24 on your routing table and not
anything higher, then you will need only about three summary statements to
accomplish that:
169.10.0.0 255.255.252.0
169.10.4.0 255.255.254.0
169.10.8.0 255.255.248.0
HTH
Godswill Oletu
----- Original Message -----
From: "Prakash Sosle R" <psosle@gmail.com>
To: "Cisco certification" <ccielab@groupstudy.com>
Sent: Friday, June 16, 2006 6:32 AM
Subject: Exckuding certain addresses in Area range command
> Hi Group,
>
> Could anybody pls explain to me, how can we exclude certain IP
ranges
> while summarising routes using the area range command in OSPF.
>
> Ex: If I need to summarize 169.10.1.0 - 169.10.15.255 but not include
> 169.10.7.X , how can I do this using minimum length commands ?
>
>
> If not possible using area range command , any other means ?
>
>
> TIA,
>
> Prakash
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Sat Jul 01 2006 - 07:57:33 ART