Re: Generating UDP broadcast from router using RTR possible?

From: Petr Lapukhov (petr@internetworkexpert.com)
Date: Fri Jun 16 2006 - 08:33:56 ART

• Next message: Petr Lapukhov: "Re: BGP AS Path Access List and Filter List Question"
• Previous message: Victor Cappuccio: "RE: BGP AS Path Access List and Filter List Question"
• Maybe in reply to: Pierre-Alex: "Generating UDP broadcast from router using RTR possible?"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Koen,

I think it's "control channel" for RTR, which is used to contact RTR
responder.
You should usually disable it, if you just generate flow of packets, and
don't have responder configured :)

Someting like that:

rtr 100
 type udpEcho dest-ipaddr 1.1.1.1 dest-port 1000 control disable

HTH,

-- 
Petr Lapukhov, CCIE #16379
petr@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987 x 705
Outside US: 775-826-4344 x 705
24/7 Support: http://forum.internetworkexpert.com
Live Chat: http://www.internetworkexpert.com/chat/

• Next message: Petr Lapukhov: "Re: BGP AS Path Access List and Filter List Question"
• Previous message: Victor Cappuccio: "RE: BGP AS Path Access List and Filter List Question"
• Maybe in reply to: Pierre-Alex: "Generating UDP broadcast from router using RTR possible?"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Sat Jul 01 2006 - 07:57:33 ART