From: san (san.study@gmail.com)
Date: Sat Jun 17 2006 - 02:10:53 ART
Can you try "remove private-as" bgp neighbor command to R6. & also dont
set "as-set" in the aggregate command at R4
On 6/16/06, Navin MS <navin_ms07@yahoo.com> wrote:
>
> Sorry for the typo ... it should be
>
> R5 sends an aggregate route to R4 with AS_PATH = "65005 {300 400}"
>
>
> --- Navin MS <navin_ms07@yahoo.com> wrote:
>
> > Hi Group,
> >
> > While doing a BGP scenario I stumbled upon the following.
> >
> > R3
> > |
> > |
> > R4 ---- R5
> > |
> > |
> > R6
> >
> > R3,R4,R5 belong to same Confed AS 700 and R6 belong to AS 800.
> > R3 is in sub-AS 65003
> > R4 is in sub-AS 65004
> > R5 is in sub-AS 65005
> >
> > R3 sends an aggregate route to R4 with AS_PATH = "65003 {100 200}"
> > R5 sends an aggregate route to R4 with AS_PATH = "65004 {300 400}"
> > Now, R4 has to send an aggregate of the above two aggregated routes to
> R6 BUT should remove the
> > Private ASes 65003 and 65004.
> >
> > How can I accomplish this ? What will the AS_PATH looks like ?
> >
> > Thanks,
> > Naveen.
> >
> >
> >
> > __________________________________________________
> > Do You Yahoo!?
> > Tired of spam? Yahoo! Mail has the best spam protection around
> > http://mail.yahoo.com
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
> >
>
>
> __________________________________________________
> Do You Yahoo!?
> Tired of spam? Yahoo! Mail has the best spam protection around
> http://mail.yahoo.com
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
-- Thanks & Rgds SAN
This archive was generated by hypermail 2.1.4 : Sat Jul 01 2006 - 07:57:33 ART