From: Bajo (bajoalex@gmail.com)
Date: Fri Jun 30 2006 - 06:51:20 ART
Hi Victor,
Am not sure about the question. Are u asking why it did not do 100 repeats?
That sounds a bug :)
It seems to do it on a 12.3(6.2)T2 nicely -actually tried it 10000
times :)
R5#ping 2001:B::5 rep 10000
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Success rate is 100 percent (10000/10000), round-trip min/avg/max = 0/0/4 ms
(the repeat part of "ping ipv6" does not work on 12.2 mainline. Introduced
12.3(4)T).
On 6/29/06, Victor Cappuccio <cvictor@protokolgroup.com> wrote:
>
> Is this a BUG here ?
>
>
>
> Rack2R1#ping 2001:B::5
>
>
>
> Type escape sequence to abort.
>
> Sending 5, 100-byte ICMP Echos to 2001:B::5, timeout is 2 seconds:
>
> !!!!!
>
> Success rate is 100 percent (5/5), round-trip min/avg/max = 64/65/72 ms
>
>
>
> Rack2R1#ping 2001:B::5 rep 1000
> <--Here
>
>
>
> Type escape sequence to abort.
>
> Sending 5, 100-byte ICMP Echos to 2001:B::5, timeout is 2 seconds:
>
> !!!!!
> !!! Only 5 ICMP Echo Request :D
>
> Success rate is 100 percent (5/5), round-trip min/avg/max = 64/64/64 ms
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
-- Kind Regards,Bajo
This archive was generated by hypermail 2.1.4 : Sat Jul 01 2006 - 07:57:34 ART