From: Brian McGahan (bmcgahan@internetworkexpert.com)
Date: Tue Jul 04 2006 - 16:03:06 ART
It means that the device 150.1.5.5 will be the RP for all groups
(224.0.0.0/4) except for the 225.0.0.0/8 range. In other words it will
service only 224.0.0.0 - 224.255.255.255 and 226.0.0.0 -
239.255.255.255.
HTH,
Brian McGahan, CCIE #8593
bmcgahan@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987 x 705
Outside US: 775-826-4344 x 705
24/7 Support: http://forum.internetworkexpert.com
Live Chat: http://www.internetworkexpert.com/chat/
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
Of
> Sami
> Sent: Tuesday, July 04, 2006 11:48 AM
> To: ccielab@groupstudy.com
> Subject: PIM group
>
> CCO doesn't have any explanation about (-) sign in group field ,
somebody
> know why 225.0.0.0/8 is shown as (-) ?
>
> R5#show ip pim rp mapping
> PIM Group-to-RP Mappings
> This system is an RP (Auto-RP)
>
> Group(s) 224.0.0.0/4
> RP 150.1.5.5 (?), v2v1
> Info source: 150.1.3.3 (?), elected via Auto-RP
> Uptime: 00:02:38, expires: 00:045
> *Group(s) (-)225.0.0.0/8
> * RP 150.1.5.5 (?), v2v1
> Info source: 150.1.3.3 (?), elected via Auto-RP
> Uptime: 00:00:14, expires: 00:02:41
> R5#
> *Jul 4 16:44:47.014: Auto-RP(0): Build RP-Announce for 150.1.5.5,
> PIMv2/v1,
> ttl 16, ht 181
> **Jul 4 16:44:47.014: Auto-RP(0): Build announce entry for (-
> )(225.0.0.0/8)
>
> **Jul 4 16:44:47.014: Auto-RP(0): Build announce entry for
(224.0.0.0/4)
> *Jul 4 16:44:47.014: Auto-RP(0): Send RP-Announce packet on
Serial0/0/0
> *Jul 4 16:44:47.014: Auto-RP(0): Send RP-Announce packet on
> FastEthernet0/0
> *Jul 4 16:44:47.014: Auto-RP(0): Send RP-Announce packet on
> FastEthernet0/1
> *Jul 4 16:44:47.014: Auto-RP: Send RP-Announce packet on Loopback0
> R5#
>
>
This archive was generated by hypermail 2.1.4 : Tue Aug 01 2006 - 07:13:46 ART