From: mtrejo@ccreta.com
Date: Mon Jul 10 2006 - 16:01:42 ART
Hi everybody
Could you help me?
Actually we bought:
2 Routers Cisco 1760-V
Four VIC's:
2 VIC2-2FXS
2 VIC2-2FXO
Two WICS
2 WIC-4ESW 4-Port Fast Ethernet Switch WAN Interface Card
2 WIC-2T dual-serial port WAN interface cards
The instalation of each cards it was the next:
Router_A
Slot 0: WIC-4ESW
Slot 1: WIC-2T
Slot 2: VIC2-2FXO
Slot 3: VIC2-2FXO
Router_B
Slot 0: WIC-4ESW
Slot 1: WIC-2T
Slot 2: VIC2-2FXS
Slot 3: VIC2-2FXS
Devices plugged
In the Router A
4 extensions from a NX-308 Hybrid Key System
In the Router B
4 Standar Telephone's
I already configure each VIC's ports whith medium complexity
And the FastEthernet 0 in both Routers with ip addresses 192.168.2.29 and 192.168.2.28
I already configure the WIC-4ESW to recive nodes in both routers making a VLAN for the voip calls
Router_A
WIC-4ESW: 192.168.3.120
Router_B
WIC-4ESW: 192.168.3.10
I already configure the cards VIC2-2FXO and the VIC2-2FXS for make dial peers voice pots and
dial peer voice voip
Actually The Router_A:
Recive 4 extensions from a NX-308 Hybrid Key System
In the Router_B:
Can make voip calls from the Standar Telephone to other VIC2-2FXS ports and also can make it to
Extensions of the NX-308
The case:
When i make a call from Router_B to a extension of the NX-308 Hybrid Key System, I Dial a number of the
dial peer voice pots in the Router_A to have a Dial tone and next Dial again the extension of the NX-308
Hybrid Key System
What i need to do to make one dial?
Can i make this?
I read about the DID interfaces like a VIC-2DID compatible with the 1760-V routers that can make a direct dial, but i need to know if can make it with the infraestructure that i have.
Could you help me?
Kindly
Ing.Marco Antonio Trejo Lemus
IT.Department
This archive was generated by hypermail 2.1.4 : Tue Aug 01 2006 - 07:13:47 ART