From: Arun Arumuganainar (aarumuga@hotmail.com)
Date: Fri Jul 14 2006 - 02:42:13 ART
Hi all ,
No new feature will be added on the main line. Bug fixes are the only thing
that is allowed on the mainline .
Hence if it is not available in 12.4 it should not available in 12.4.8 and
if it is supported on 12.4.8 it should also be there on 12.4 as well.
By the way what is feature-set you are running . Some times advance features
will be available on only Plus feature set . We could confirm if both of you
send you "show version" o/p.
Thanks and Regards
Arun
----- Original Message -----
From: "Scott Morris" <swm@emanon.com>
To: "'Hough, Earl'" <Earl.Hough@sarcom.com>; "'Brian McGahan'"
<bmcgahan@internetworkexpert.com>; "'Russell Kelly (rukelly)'"
<rukelly@cisco.com>; "'Tim Chan'" <timanji@yahoo.com>;
<ccielab@groupstudy.com>
Sent: Thursday, July 13, 2006 9:05 PM
Subject: RE: R/S CCIE Lab Kit
> Ahhh... I hadn't put 12.4 images on there, so that may explain that!
>
> -----Original Message-----
> From: Hough, Earl [mailto:Earl.Hough@sarcom.com]
> Sent: Thursday, July 13, 2006 11:03 AM
> To: Scott Morris; Brian McGahan; Russell Kelly (rukelly); Tim Chan;
> ccielab@groupstudy.com
> Subject: RE: R/S CCIE Lab Kit
>
> The 3640 routers I have with 12.4.8 Enterprise Plus definitely ran OSPFv3.
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> Scott Morris
> Sent: Thursday, July 13, 2006 10:47 AM
> To: 'Brian McGahan'; 'Russell Kelly (rukelly)'; 'Tim Chan';
> ccielab@groupstudy.com
> Subject: RE: R/S CCIE Lab Kit
>
> You sure the 3640 does? None of the images I loaded on it would run it.
> They all took the command but did nothing (which I think is what the 3620
> did as well).
>
> I don't have a 3660 in my lab, so I can't test that out! :)
>
> Scott
>
> -----Original Message-----
> From: Brian McGahan [mailto:bmcgahan@internetworkexpert.com]
> Sent: Thursday, July 13, 2006 10:08 AM
> To: Scott Morris; Russell Kelly (rukelly); Tim Chan;
ccielab@groupstudy.com
> Subject: RE: R/S CCIE Lab Kit
>
> 3640 and 3660 support OSPFv3, 3620 does not.
>
> Brian McGahan, CCIE #8593
> bmcgahan@internetworkexpert.com
>
> Internetwork Expert, Inc.
> http://www.InternetworkExpert.com
> Toll Free: 877-224-8987 x 705
> Outside US: 775-826-4344 x 705
> 24/7 Support: http://forum.internetworkexpert.com
> Live Chat: http://www.internetworkexpert.com/chat/
>
>
> > -----Original Message-----
> > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
> Of
> > Scott Morris
> > Sent: Thursday, July 13, 2006 2:15 AM
> > To: 'Russell Kelly (rukelly)'; 'Tim Chan'; ccielab@groupstudy.com
> > Subject: RE: R/S CCIE Lab Kit
> >
> > OSPFv3 won't run on the 3600 series routers.
> >
> >
> > Scott Morris, CCIE4 (R&S/ISP-Dial/Security/Service Provider) #4713,
> JNCIE
> > #153, CISSP, et al.
> > CCSI/JNCI-M/JNCI-J
> > smorris@ipexpert.com
> > http://www.ipexpert.com
> >
> >
> >
> > -----Original Message-----
> > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
> Of
> > Russell Kelly (rukelly)
> > Sent: Thursday, July 13, 2006 2:27 AM
> > To: Tim Chan; ccielab@groupstudy.com
> > Subject: RE: R/S CCIE Lab Kit
> >
> > Hi - Yeah you can enable ipv6 et al - but there was something it
> couldn't
> > do
> > -- possibly ospfv3 or another part of ipv6 that was needed (I remember
>
> > checking on CCO) --- however, I'm happy to be proved wrong and I'll
> drag
> > it outta the cupboard again! :-)
> >
> > -----Original Message-----
> > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
> Of
> > Tim
> > Chan
> > Sent: 13 July 2006 00:18
> > To: ccielab@groupstudy.com
> > Subject: RE: R/S CCIE Lab Kit
> >
> > I have a 3620 that's running ipv6, and it's been working great for me.
> >
> > R3#sho ver
> > Cisco Internetwork Operating System Software IOS (tm) 3600 Software
> > (C3620-J1S3-M), Version 12.3(17), RELEASE SOFTWARE (fc2)
> >
> > ROM: System Bootstrap, Version 11.1(20)AA2, EARLY DEPLOYMENT RELEASE
> > SOFTWARE (fc1)
> > ROM: 3600 Software (C3620-J1S3-M), Version 12.3(17), RELEASE SOFTWARE
> > (fc2)
> >
> > R3 uptime is 4 hours, 29 minutes
> > System returned to ROM by reload
> > System restarted at 11:42:58 pst Wed Jul 12 2006 System image file is
> > "flash:c3620-j1s3-mz.123-17.bin"
> >
> > cisco 3620 (R4700) processor (revision 0x81) with 61440K/4096K bytes
> of
> > memory.
> > Processor board ID 16204030
> > R4700 CPU at 80MHz, Implementation 33, Rev 1.0 Bridging software.
> > X.25 software, Version 3.0.0.
> > TN3270 Emulation software.
> > 2 Ethernet/IEEE 802.3 interface(s)
> > 1 Serial network interface(s)
> > 4 Low-speed serial(sync/async) network interface(s) DRAM configuration
> is
> > 32
> > bits wide with parity disabled.
> > 29K bytes of non-volatile configuration memory.
> > 16384K bytes of processor board System flash (Read/Write) 16384K bytes
> of
> > processor board PCMCIA Slot1 flash (Read/Write)
> >
> > Configuration register is 0x2102
> >
> > R3#conf t
> > Enter configuration commands, one per line. End with CNTL/Z.
> >
> > R3(config)#ipv6 unicast-routing ?
> > <cr>
> >
> > -tim
> >
> > > -----Original Message-----
> > > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
> > Of
> > > Russell Kelly (rukelly)
> > > Sent: Wednesday, July 12, 2006 3:50 PM
> > > To: loke; Marc Russell
> > > Cc: David Fuller; ccielab@groupstudy.com
> > > Subject: RE: R/S CCIE Lab Kit
> > >
> > > The 3620 can't do ipv6 (though it's capable of MPLS for the SP
> train)
> > > -- the 3640 is a good fit for the lab kit that requires 4+ FR
> > interfaces
> > > -- also not he 2600's need a ROMMON upgrade to run the 12.2(17)
> train
> > > and memory upgrades (The minimum boot ROM version is 12.1(3r)T1) --
>
> > > unless you want to mess around with TFTP boot parameters --
> > >
> >
> >
> >
> > ---------------------------------
> > Sneak preview the all-new Yahoo.com. It's not radically different.
> Just
> > radically better.
> >
> >
> _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
> >
> >
> _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
> >
> >
> _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Tue Aug 01 2006 - 07:13:47 ART