From: Plank, Jason (JPlank@concordefs.com)
Date: Sat Jul 22 2006 - 15:02:27 ART
1 is the default.
Switch#show port-security interface fa0/19
Port Security : Enabled
Port Status : Secure-down
Violation Mode : Restrict
Aging Time : 0 mins
Aging Type : Absolute
SecureStatic Address Aging : Disabled
Maximum MAC Addresses : 1
Total MAC Addresses : 1
Configured MAC Addresses : 1
Sticky MAC Addresses : 0
Last Source Address:Vlan : 0000.0000.0000:0
Security Violation Count : 0
"Maximum MAC Addresses"
-------------------
Jason Plank, CCIE #16560
Network Engineer
101 Bellevue Parkway
Wilmington, DE 19809
E-mail: JPlank@concordefs.com
Phone: 302-793-5913
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of Sami
Sent: Saturday, July 22, 2006 1:51 PM
To: ccielab@groupstudy.com
Subject: Port security
Group,
One of the task say F0/19 accept traffic only from R4 , other host traffic
should be dropped ,while port remain enabled.
> switchport port-security mac-addres 0001.1234.1111
> switchport port-security maximum 1
> switchport port-security violation restrict
Do I need port-security max-mac address to 1 or not ?
Thanks
This archive was generated by hypermail 2.1.4 : Tue Aug 01 2006 - 07:13:48 ART