From: trevelle@wowway.com
Date: Thu Aug 03 2006 - 09:04:17 ART
I understand that the auto-cost refernce-bandwidth command is used for interface that are greater than 100 mbs so that you can have the correct cost associated with that interface. My question is what method is used to come up with the MBITS per second when using the auto-cost reference bandwidth command.
R4(config-router)#AUto-cost REference-bandwidth ?
<1-4294967> The reference bandwidth in terms of Mbits per second
Thx in advance.
This archive was generated by hypermail 2.1.4 : Fri Sep 01 2006 - 15:41:55 ART