From: john matijevic (john.matijevic@gmail.com)
Date: Tue Aug 08 2006 - 12:04:14 ART
Hello Aamir,
You have to disable the nat on the dsl router if you are using a static
address.You also need to make sure you have another static ip address
available, you can ask these questions to your ISP. Otherwise, your ISP
maybe using bridge mode and you would have to modify your pix configuration
for pppoe. Please discuss offline if yoiu have further questions.
Sincerely,
John
On 8/8/06, Aamir Aziz <aamiraz77@gmail.com> wrote:
>
> Hi there ppl
>
> I have a simple scenario for PIX 506E but i cant seem to get it working,
> any
> help is appreciated:
>
> ADSL Router ----------PIX 506E-----------PC
>
> ADSL Router is getting dynamic public IP from ISP.
> ADSL router Local IP is = 10.1.1.1
>
> PIX outside = 10.1.1.2
> PIX inside = 192.168.1.2
>
> PC = 192.168.1.1
>
> PIX Version 6.3(5)
> ip address outside 10.1.1.2
> ip address inside 192.168.1.2 255.255.255.0
> ip audit info action alarm
> ip audit attack action alarm
> pdm logging informational 100
> pdm history enable
> arp timeout 14400
> global (outside) 1 interface
> nat (inside) 1 0.0.0.0 0.0.0.0 0 0
> route outside 0.0.0.0 0.0.0.0 10.1.1.1
>
> The ADSL router (Linksys) is also doing NATing. I have no static public
> IP.
>
> But net is not working on the PC, what am I missing here?
>
> Thanks
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
-- John Matijevic U.S. Installation Group Senior Network Engineer 954-969-7160 ext. 1147 (office) 305-321-6232 (cell)
This archive was generated by hypermail 2.1.4 : Fri Sep 01 2006 - 15:41:56 ART