From: Aamir Aziz (aamiraz77@gmail.com)
Date: Tue Aug 08 2006 - 13:31:50 ART
i have linksys ADSL router, ok i was able to make it in bridge mode, it gave
me two options other than PPPoA and PPPoE, it had RFC 1483 Bridge and Bridge
mode only anyway i selected bridge mode only and disabled natting, now the
ADSL does not connect to ISP (i tried the RFC 1483 Bridge also but same)
and with this command "ip address outside dhcp setroute" on the PIX it
doenst pick up the dynamic IP so now what?
Thanks
Aamir
On 8/8/06, Jens Petter <jenseike@start.no> wrote:
>
> What router/modem is it?... You probabley have some kind of web gui that
> you are able to
> log in with It is usually an easy operation to set the router to bridge
> mode..
>
>
>
> Jens
>
>
> ------------------------------
>
> *From:* Aamir Aziz [mailto:aamiraz77@gmail.com]
> *Sent:* 8. august 2006 18:08
> *To:* Jens Petter
> *Cc:* Guyler, Rik; ccielab@groupstudy.com
>
> *Subject:* Re: Simple scenario for PIX
>
>
>
> how do i bridge the ADSL router?
>
> thanks
> Aamir
>
> On 8/8/06, *Jens Petter* <jenseike@start.no> wrote:
>
> Your isp needs a route to that linknet between pix and adsl router.. You
> should
> Bridge the adsl router and you are good to go...
>
> Jens
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> Aamir Aziz
> Sent: 8. august 2006 17:44
> To: Guyler, Rik
> Cc: ccielab@groupstudy.com
> Subject: Re: Simple scenario for PIX
>
> No i meant that the ADSL router is getting dynamic public IP from ISP, the
>
> question is what network do i configure between the PIX and ADSL router,
> public (but i dont have any static IP's from ISP) or private (doesnt seem
> to
> work with private) so what to do?
>
> Thanks
> Aamir
>
> On 8/8/06, Guyler, Rik <rguyler@shp-dayton.org> wrote:
> >
> > Aamir, you say that you should be getting a dynamic address form the ISP
> > but
> > yet it appears that you statically set the address on the outside
> > interface.
> > Weird but true...I've seen some devices not allow you through unless you
> > actually get your address from that device, regardless if you use the
> same
> > address or not.
> >
> > Try using "ip address outside dhcp setroute" as an alternative.
> >
> > Also, whenever I setup DSL or cable Internet access, I like to have the
> > ISP
> > device setup as a bridge so I can terminate the public address on my
> > firewall. That way I can configure all the security myself as well as
> > remote access, which will likely need some form of dynamic DNS since you
> > are
> > getting a dynamic address. The downside to doing this is that if you
> are
> > using PPPOE, you will have to setup those parameters on your PIX instead
>
> > of
> > the DSL device.
> >
> > Rik
> >
> > -----Original Message-----
> > From: nobody@groupstudy.com [mailto: nobody@groupstudy.com] On Behalf Of
> > Aamir Aziz
> > Sent: Tuesday, August 08, 2006 10:58 AM
> > To: ccielab@groupstudy.com
> > Subject: Simple scenario for PIX
> >
> > Hi there ppl
> >
> > I have a simple scenario for PIX 506E but i cant seem to get it working,
> > any
> > help is appreciated:
> >
> > ADSL Router ----------PIX 506E-----------PC
> >
> > ADSL Router is getting dynamic public IP from ISP.
> > ADSL router Local IP is = 10.1.1.1
> >
> > PIX outside = 10.1.1.2
> > PIX inside = 192.168.1.2
> >
> > PC = 192.168.1.1
> >
> > PIX Version 6.3(5)
> > ip address outside 10.1.1.2
> > ip address inside 192.168.1.2 255.255.255.0 ip audit info action alarm
> ip
> > audit attack action alarm pdm logging informational 100 pdm history
> enable
> > arp timeout 14400 global (outside) 1 interface nat (inside) 1 0.0.0.0
> > 0.0.0.0 0 0 route outside 0.0.0.0 0.0.0.0 10.1.1.1
> >
> > The ADSL router (Linksys) is also doing NATing. I have no static public
> > IP.
> >
> > But net is not working on the PC, what am I missing here?
> >
> > Thanks
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Fri Sep 01 2006 - 15:41:56 ART