From: Stefan Grey (examplebrain@hotmail.com)
Date: Sun Aug 20 2006 - 16:26:32 ART
What do you mean under "map"??? This means if the packet has cos = "x" than
precedense will be also x???
2. Could you please remind me which is the default value of precedense and
cos in the network between routers and switches. Additional environment???
Thanks
>From: "Michael Stout" <michaelgstout@hotmail.com>
>To: examplebrain@hotmail.com, ccielab@groupstudy.com
>Subject: RE: CoS and precedense
>Date: Sun, 20 Aug 2006 12:20:10 -0700
>
>
>
>cos is found in a portion of the vlan-id field of a layer 2 packet.
>IP precedence is found in the ip tos field of an ip packet.
>They are two seperate fields found in two different types of packet header.
>
>You can map hte ip precednce to the cos and vice-versa on the 3550 switch.
>
>
>
>
>
>
>From: "Stefan Grey" <examplebrain@hotmail.com>
>Reply-To: "Stefan Grey" <examplebrain@hotmail.com>
>To: ccielab@groupstudy.com
>Subject: CoS and precedense
>Date: Sun, 20 Aug 2006 19:23:14 +0100
>What is the differnece between COS and precedense???
>I have seen that both can be in the range of 0 to 7. But cos is used in the
>mac acl and precedense is used in the ip acl.
>
>What is finally the difference. What does for example mean the packet with
>precedense 0 and cos 3??
>
>Thanks,
>
>_________________________________________________________________
>Customise your home page with RSS feeds at MSN Ireland! http://ie.msn.com/
>
>_______________________________________________________________________
>Subscription information may be found at:
>http://www.groupstudy.com/list/CCIELab.html
>
>
This archive was generated by hypermail 2.1.4 : Fri Sep 01 2006 - 15:41:57 ART